UBTECH AIMBOT USER MANUAL USERS OF THE PRODUCT SERVICE MANUAL 产品用户手册 AI Fearless Clean Endless UBTECH ROBOTICS CORP LTD
UBTECH AIMBOT USER MANUAL CONTENT CONTENT .......................................................................................................................................... 1 Introduction ..................................................................................................................................... 3 Part 1 Product Overview .................................................................................................................. 4 1.1 Package List ....................
UBTECH AIMBOT USER MANUAL Introduction ◆ Thank you for purchasing ADIBOT equipment from UBTECH ROBOTICS CORP LTD. This user manual is only applicable to the operation of ADIBOT. ◆ In order to ensure safe use of ADIBOT and quickly grasp the usage method, please read this manual carefully. ◆ Children under 12 years old should use this product under the guidance of adults. ◆ This manual is for user's reference and guidance only, and the description may not be detailed enough.
UBTECH AIMBOT USER MANUAL Part 1 Product Overview 1.
UBTECH AIMBOT USER MANUAL 1.2 Product View Front: PIR infrared sensor, camera, UVC tube, reflector, push rod, horn, universal wheel with brake, Daisy chain. Back: switch key, emergency stop switch, chassis, fan port, charging port 1.
UBTECH AIMBOT USER MANUAL Part 2 Safety Information Please read the following information carefully, the company will not be responsible for direct or indirect losses caused by improper use of the product. Note: To ensure safety, it is strongly recommended that users follow the following safety regulations when operating the robot. This manual does not guarantee to cover all possible situations.
UBTECH AIMBOT USER MANUAL Please keep ADIBOT dry, and avoid contact with oil, steam, water vapor, moisture, dust layer and other substances of the camera driven by the device. The normal working humidity range of ADIBOT is 10%-85%. The normal working temperature range of ADIBOT is 0-40 degrees Celsius (32-104 degrees Fahrenheit). Please keep ADIBOT away from open flames and heat sources, and avoid direct sunlight, so as not to damage the image sensor of the camera.
UBTECH AIMBOT USER MANUAL UVC Emitter Equipment Emergency Stop Electrical Device DO NOT ENTER, UVC light can harm eyes and skin Do NOT push on tower. Use the halo handle only. Do NOT touch the lamp. Only certified personnel allowed. Warning Sign System Cooling Part 3 Device System Operation ADIBOT should be used as a supplement rather than a substitute for sanitation and sanitation.
UBTECH AIMBOT USER MANUAL Remove the object or paper to ensure that the place or object that needs to be disinfected can be exposed to ultraviolet light Under the light. If the home in the room moves, you need to move ADIBOT for a round of disinfecting. Step 3 The operator leaves the room and closes the door to prevent anyone from entering the disinfecting site. Place the warning sign at the door and turn on it.
UBTECH AIMBOT USER MANUAL 5 Daily Maintenance Warning Warning views 4.1.1 System Setting The system settings page provides settings for various parameters of the robot, including network, security and other parameters. • The user can set the network card mode and hotspot mode, the default is the hotspot mode. • Specify the Wi-Fi router SSID, server IP, and port. At this time, the Wi-Fi module will switch to card mode and access the central network.
UBTECH AIMBOT USER MANUAL • • • • password, reset the password forgotten, and remote networking mode. Log in to the home page to learn about the working status, life status, and component status of the device. Working status, display status, room, remaining time. The time and report link of the last kill mission. The status includes idle, disinfection, disinfection pause, and failure. Life status, showing the current usage and expected usage of the device's disk status and lamp life.
UBTECH AIMBOT USER MANUAL • • • • • • • Before starting the disinfection, ADIBOT will prompt the operator "prepare to kill, please leave as soon as possible, 20 seconds countdown." Please be sure to leave the disinfection scene within the specified time to avoid injury. The robot enters the arming mode: the video is turned on, the PIR is activated, and the instruction is issued to notify the access control card, and the access control card "disinfection" indicator light is on.
UBTECH AIMBOT USER MANUAL View disinfection points Initiation countdown UBTECH ROBOTICS CORP LTD Configure parameters In disinfection Task review Task complete
UBTECH AIMBOT USER MANUAL Task pause Task terminated passively Task terminated proactively 4.1.4 Report Management The killing report list shows the results of all killing tasks. The marking task is aborted or completed.
UBTECH AIMBOT USER MANUAL Report management hommage Report - Starred Report - Room No Report Report - Date 4.1.5 Daily Maintenance Routine and routine maintenance of the equipment. The maintenance content includes alarm, diagnosis, log, upgrade and restore. • The alarm module can obtain current system alarm information and recent historical alarm information, and users can operate on it according to their own management methods.
UBTECH AIMBOT USER MANUAL the local one-click, which is convenient for customer operation, easy for operation and maintenance to troubleshoot problems, and improve response efficiency. • The upgrade module provides the function of querying and upgrading the robot version. • Restore the module to restore the factory settings of the robot. Daily Maintenance - Warning Daily Maintenance - Diagnose Daily Maintenance - Log Daily maintenance - upgrade Daily maintenance - Reset 4.
UBTECH AIMBOT USER MANUAL emergency. Step 1 Activate the remote control First, you need to start ADIBOT. After 30 seconds, the software is started; then, set the remote control to be in the Bluetooth pairing state by ("Start" + "Continue" simultaneously press for 3 seconds). Step 2 Set parameters Set the kill time "X minutes" and set the kill mode "full power/low power”.
UBTECH AIMBOT USER MANUAL 5.2 Maintenance Warning: Do not use abrasives, aerosols, alcohol-containing liquids or other liquids to clean ADIBOT, because they may contain flammable substances or may damage the plastic casing of ADIBOT; do not spray or shower ADIBOT with water or other liquids, please let ADIBOT Keep it dry. The product itself can be self-cleaning. Follow the steps below to ensure safety and avoid damaging the robot: 1. Press the chassis power button to turn off the device; 2.
UBTECH AIMBOT USER MANUAL Main Processor Nvidia Nano 4GB RAM, 16GB ROM, 64G USB Storage Main Operating System Linux Wireless Module 2.4GHz/5Ghz Band 802.11b/g/n/ac, Bluetooth 5.0 Acoustics 1x 10W Speaker Environment sensors PIR Sensor Recording camera 2MP Front view , 480P External Interface Emergency Stop Button Surface disinfection No. of lamps (Top) 8x 155W UVC wavelength 253.7nm UVC Intensity at 1m min.
UBTECH AIMBOT USER MANUAL - 检查底盘电源插口是否松动异常； ADIBOT 无法启动 - 检查底盘开关机按键是否松动异 常； -如果问题仍然存在，请联系 AIMBOT 技术支持中心。 -如果地盘太烫且您无法触摸它，这 可能是由故障引起的。 设备地盘过烫 -请迅速从插座断开，并联系 ADIBOT 技术支持中心。 Part 7 Declaration of Conformity 7.1 FCC compliance statement This device complies with Part 15 of the FCC Rules.
UBTECH AIMBOT USER MANUAL 7.2 FCC Radiation Exposure statement This equipment complies with FCC radiation exposure limits set forth for an uncontro lled environment. This equipment should be installed and operated with minimum distanc e 20cm between the radiator and your body. This transmitter must not be colocated or operating in conjunction with any other antenna or transmitter.
