User's Manual

UBTECH AIMBOT USER MANUAL
UBTECH ROBOTICS CORP LTD
• Before starting the disinfection, ADIBOT will prompt the operator "prepare to kill, please
leave as soon as possible, 20 seconds countdown." Please be sure to leave the
disinfection scene within the specified time to avoid injury.
• The robot enters the arming mode: the video is turned on, the PIR is activated, and the
instruction is issued to notify the access control card, and the access control card
"disinfection" indicator light is on.
• When the user needs to temporarily kill UV temporarily due to emergency affairs, it can
be done in the following ways:
• Click the "Pause" button of the task on the screen;
• Click the "Pause" button on the remote control.
• Click the software screen or the "Continue" button on the remote control to resume the
disinfection, re-implement the exit reminder process, and restart the exit countdown for
20 seconds.
• When the disinfection time is up, there is no abnormality in the disinfection, and the
disinfection task ends and the message "completed" is displayed.
• Man-made active control of the end of the disinfection task, prompts the "terminated"
icon to display the active end; non-man-made active control, such as PIR detection
abnormality and the end of the disinfection task, prompts the "terminated" icon to
display passive end.
• After the task is terminated, it can no longer proceed, and the disinfection task needs
to be recreated.
Create a new task