User's Manual

UBTECH AIMBOT USER MANUAL
UBTECH ROBOTICS CORP LTD
5.2 Maintenance
Warning:
Do not use abrasives, aerosols, alcohol-containing liquids or other liquids to clean
ADIBOT, because they may contain flammable substances or may damage the plastic
casing of ADIBOT; do not spray or shower ADIBOT with water or other liquids, please let
ADIBOT Keep it dry. The product itself can be self-cleaning.
Follow the steps below to ensure safety and avoid damaging the robot:
1. Press the chassis power button to turn off the device;
2. Disconnect the charging cable from ADIBOT to ensure that the device is completely
powered off;
3. Check if the lamp tube is damaged, if there is no damage, follow the next steps;
4. Clean the outside of the equipment with a soft damp cloth;
5. Thoroughly wipe the outside of the equipment with a soft dry cloth;
6. Check if the equipment is wiped dry.
Warning:
Please clean the dust on the camera and sensors. The dust will affect the normal
operation of the sensors.
Do not clean the reflector behind the lamp to avoid leaving scratches on the reflector.
When the lamp tube breaks, ventilate the room for 20 minutes before disposing of the
glass fragments. At this time, the gas in the lamp tube will not enter the human respiratory
tract.
Note: If the equipment is damaged, abnormal sound or not working properly, please
contact the local after-sales service.
Part 6 Reference
6.1 Device Specification
Dimensions
Size
1935(H)*555(W)*555(D)（mm）
Weight
50kg
Operating temperature
0℃~40℃
Operating humidity
10 to 85% relative humidity (indoor use only)
Storage temperature
-40℃~60℃
Storage humidity
≤95% (non-condensation indoor only)
Robot Body Material
Aluminium Alloy，PC+ABS
Robot System