User's Manual

UBTECH AIMBOT USER MANUAL
UBTECH ROBOTICS CORP LTD
Please keep ADIBOT dry, and avoid contact with oil, steam, water vapor, moisture, dust layer
and other substances of the camera driven by the device.
The normal working humidity range of ADIBOT is 10%-85%.
The normal working temperature range of ADIBOT is 0-40 degrees Celsius (32-104 degrees
Fahrenheit).
Please keep ADIBOT away from open flames and heat sources, and avoid direct sunlight, so as
not to damage the image sensor of the camera.
Do not cover its sensor, otherwise it may affect the normal operation of its camera and sensor.
Do not use harsh cleaners or organic solvents to wipe the camera lens.
All maintenance work should be carried out under the guidance or supervision of ADIBOT
technicians.
Attention
Do not lean on ADIBOT.
In order to reduce the risk of electric shock, please choose a three-phase plug with a bottom
line connection. If the plug does not fit the socket, please contact a professional to complete the
correct installation of the socket.
If your device is out of control, press the emergency stop button.
ADIBOT can only be used indoors, please do not use it outdoors.
On uneven ground or slopes, please carefully push the equipment, especially the daisy chained
equipment.
When ADIBOT is working, please do not stand in direct contact with UVC light (unless you wear
the necessary protective equipment), so as not to affect AIMBOT's task execution.
The lamp tube contains mercury. Please dispose of the broken lamp tube in accordance with
local laws and regulations.
If ADIBOT works abnormally, especially when you detect unusual sounds, smells or smoke,
please take precautions and immediately press the emergency stop button, turn off the power,
unplug the plug, and contact the ADIBOT technical support center.