Warsaw 28.06.
Index Index 2 Device description 3 Specification 3 Block diagram of the device 5 Photos of the product 6 Label 7 Attachments 8 2
Device description Gateway (type V2) has been designed to act as a gateway between network (TCP/IP protocol) and USB devices. Based on submodules: - Carambola2 (MCU/NETWORK) - SIlvertel AG9700 (POE) - USB HUB Anodised aluminium enclosure is used. Device is turned off by disconnecting DC plug or ETH connector (when POE powered). Normal work is indicated by orange LED placed on ETH connector, active ethernet connection is indicated by green LED.
Mechanical specification: Dimensions: 163,54 x 94,10 x 32 (L x l x H) [mm] 4
Block diagram of the device 5
Photos of the product 6
Label The device is marked with following label: 7
Attachments 1. filled form - ETSI_EN_300_328_form_gateway_V2 2. folder PCB which contains: electrical schematic, BOM, PCB layout 3. folder datasheets which contains: datasheets of used parts and PCB components 4. folder pre-CE which contains documents that confirm CE compatibility of used modules FCC Warnning: This equipment has been tested and found to comply with the limits for a Class B digital device, Pursuant to part 15 of the FCC Rules.
