User's Manual

can manually start the installation by opening 【My Computer】 □
【CD/DVD Rom】□ then click on the【Setup】program.
3. When installing the driver, follow the installation instructions
on screen and press the “Enter＂ key. After the installation has
completed, reboot the computer.
ENGLISH 1-2
5. Hardware Installations
1. After installing the driver, please
restart your computer. Then connect the
dongle to your USB port (as left picture)。
2. Put the battery into the back of Wireless
Tablet。
3. Open Wireless Tablet Power。
4. Press Resume button around 4 seconds then
your setting will be finished。
5. After restart your computer, on bottom
right of the screen, you can find the
tablet icon ( ) within there.
★ Please install your drive then connect your
dongle to the USB port. It will avoid
driver installation error or delay while
the system is detecting new hardware.
6. Verifying Hardware and Driver Functions
Please follow the steps to verify if the wireless tablet is
installed properly︰
4
2
3
1
5
6
7
8
9
10
11
1-Express Key 8-Dongle
2-LED Indicator 9-Left button
3-Hot-cell 10-Wheel scrolling
4-Working Area 11-Right button
5-Button 2
6-Button 1
7-Pen tip