User's Manual

3. Locate where the Original Keyboard Connector attaches to the computer. In
the figure 4 below, we assume it is in the back of a desktop PC. Examine the
size of the keyboard connector (see figure 5 below).
Figure 4 Connection of the keyboard to a desktop PC before installing the Pen
Tablet
Detach the Original Keyboard Connector from the Keyboard
Socket, and remember the location of the Keyboard Socket so
you can find it later. Examine the connector and try to match
one of the pictures in the figure below. If it matches Small
Connector, go to the next step. Otherwise, you need to find two
Keyboard Acaptors (not included) so the connectors will match.
Figure 5 Identifying the Keyboard Connector
4. If your keyboard has a small (PS/2) connector (see figure above), connect the
Original Keyboard Connector to the Female Keyboard Connector (the one
connected with a single data cable). Then, connect the Male Keyboard
Connector (the one with a split data cable) to the PC at the Keyboard Socket to
which the keyboard was originally attached. Go to Step 6
.