User's Manual

Figure 2 Attaching a USB Pen Device to PC
Installing Pen Tablet with RS232C Interface
Before attempting to install the Pen Tablet on your computer, please check that the
system requirements
are all met, and that all items listed in Pen Tablet Packing List
are present. This section describes the installation procedure for Pen Tablet with
RS232C Interface. If you have a Pen Device with USB interface, please see Installing
Pen Device with USB Interface.
You attach the Pen Tablet to the computer by inserting the Pen Tablet’s Keyboard
Connectors between the keyboard and the computer, and by connecting the Pen
Tablet’s RS232C Connector to an available COM (serial) port. The procedure is
described below.
1. Shut down Windows and turn off the power of your PC.
2. Examine the connecting parts of the Pen Tablet.
Figure 3 Parts of the Pen Tablet for connecting to the PC