User's Manual

Figure 1 Parts of a Pen Device
Note: The optional Cordless Mouse requires a Pen Tablet with USB Interface.
Installing Hardware
To install the Pen Device,
1. Attach the hardware to your computer according to its type (Pen Device with
USB Interface, Pen Tablet with RS232C Interface, or Tablet Keyboard with
RS232C Interface),
2. Ve rif y that hardware is installed properly,
3. Install the Driver and Pen Utilities, and
4. Ver ify that the pen device as installed functions properly.
5. Install optional Application Software according to its own instructions (not
included in this manual). Most Application Software is installed by running
its Setup program.
Installing Pen Device with USB Interface
To attach the Pen Device with USB interface to your computer, first locate an available
USB Receptacle on the computer, usually on the back panel, on the monitor, or on the
keyboard. Then, plug the USB Connector into the Receptacle, in a way similar to the