USB3.
Thanks for purchasing UCEC USB3.0 HD Game Video Capture Device. The following guides you how to set up. Hope this device will bring you nice digital experience. Easy to use, just plug to your PC (Windows, Mac, Linux), no need install driver, you can use any 3rd party software to capture or stream your HD game and other HD video source. Full HD 1080p60 video capture, It allows inputting 4K 30 HDMI signal, capture 1080p60 video and 4k30 pass-through.
Features: 1. USB3.0 port – To connect to computer via USB3.0 cable. 2. LED – Will be on while USB3.0 cable is connected with computer. 3. HDMI input port – Connect video source with HDMI cable(Free Gift). 4. HDMI output port – Connect to TV or monitor to show video, not necessary for capturing. 5. LINE IN port(3.5mm TRS) – It can stream or record party chat and gameplay audio. Support 3.5mm TRS headphones/earphones to add your voice to live or recorded video.
OPERATION ON WINDOWS Firstly, set the audio capture sample rate : Note: It is an important setting, otherwise will caused the bad audio quality 1. After connect the device to computer, right click on“Speaker”of your computer, choose“Recording devices” 2. Double click “UCEC HD Video Capture”---- At “Advanced” choose the sample rate to “2 channel 16 bit, 48000 Hz (DVD Quality)” --Note: Most of all, set to 48000Hz will get nice sound.
3. If need adjust the input audio level, or if no audio input, at “Levels”, set the value: Work with OBS Studio: 1, Go to obsproject.com/download to download OBS Studio according to your computer’s operating system, and install it on your computer. Connect this game capture to computer with USB3.0 cable, and connect video source with HDMI cable. Windows will install the driver automatically, and you will see “UCEC HD Video Capture” in device manager.
2, Run OBS Studio, Click “+” icon under “Sources” window, and select “Video Capture Device”, then select “UCEC HD Video Capture ” in the drop box next to “Device”.Second, You need to choose “Custom” in Resolution/FPS Type. And 1920*1080 resolution.
3, In Audio Output Mode, you need to choose“Output desktop audio (WaveOut). In Audio Device, you need to choose “UCEC HD Video Capture”.
2)Audio Monitoring: “Monitor Only (mute output) 3)Sync offset: - 470ms (this is for audio and video sync; you can adjust it till your audio video is synchronous) 4)Then you can recording or streaming video: 8
5, For other applications may also need setting for synchronous problem: On VLC: Tools—Effects and Filters----Synchronization then adjust the delay value of Audio track synchronization, till audio video synchronous: 6, On Amcap, Capture---Setup----Preview, set the Audio latency (normally to 10m 9
Work with other applications (e.g. VLC, Media encoder, Protplayer…): Just run the application then choose capture device to“UCEC HD Video Capture”. OPERATION ON MAC: Work with OBS Studio: Download and install OBS studio, then do the same as above on windows.
OPERATION ON Linux: Work with OBS Studio: Download and install OBS studio, then do the same as above on windows. (note: Your Linux should meet OBS requirements) Work with OBS VLC (shows example for Ubuntu): 1, Right click on window, select“Open Capture Device”: 2, Choose“Video camera”---“UCEC HD Video Capture”then click“play”under Capture Device.
Using as screen sharing for online meeting: 1, First install a application and set it as above ( OBS, VLC, etc) on the computer which for meeting (with online meeting App installed, e.g.
Select“VLC Media Player”(or other application you just opened), then click“Share Screen”: The contents and presenter shows in same time: 13
Specifications: Connections Interface USB3.0 Video Input HDMI Audio Input HDMI embedded audio, Line In(3.5mm TRS) Video Output HDMI Audio Output HDMI Standards Windows 7,8,10, OS X 10.9 or later, Linux. PC: Intel Core i5-3400 + NVIDIA GT630, NB: Intel Core i7-3537U 2.0 GHz + NVIDIA GT735, Mac: i5 quad-core or above, VGA card System Requirement supporting Direct X 10, Sound card, 4GB RAM, Powered USB 3.0 port: Intel chipset with native USB 3.
Troubleshooting IMPORTANT: If the below troubleshooting can’t solve your problem, please contact us, UCEC provides you with the full refund. 1. For the Audio and Video Latency: You need to right-click“Video Capture Device“then click“Filters”.You can adjust it smaller or bigger until the audio and video synchronize. 2. Audio Problems: 1) Check your computer to operate the program's minimum system requirements. It is very important for it. 2) Check the audio output mode, select“UCEC HD Video Capture”.
3. Video problems: IF your video frozes, check your computer Version and our video capture’s system requirements. 4. For the 4K Video and 1080p Video: It allows inputting 4K 30 HDMI signal, capture 1080p60 video and 4K30 passthrough.
