Users Manual

Intercom Control ON/OFF
Intercom Group Pairing Setup
The First set up After the first set up
►Pick up Incoming call
Intercom Connect
►End / Reject Incoming call
►Last number Redial
►Swap call
Activate Siri/Google
Music
► Play
►► Skip track
◄◄ Backtrack
Activate Phone Pairing
Intercom Disconnect
Hold UP 2 sec.
Hold DOWN 2 sec.
Press UP x 2 times.
Press DOWN x 2 times.
Press POWER x 2 times
Pause
Press POWER once
Hold UP+DOWN 2 sec.
Press POWER once.
Hold POWER 2 sec.
Hold POWER+UP 2 sec.
Press POWER Once
Press QUICK ACCESS once, wait for tone
Power ON State
1
1
Press and hold QUICK ACCESS
for 5 secs until LED blinks purple.
- Verify all units to be paired are
blinking purple before next step.
2
2
3
Bluetooth List
Available Device
EXO-COM
Bluetooth List
EXO-COM Connected
LED turns blue.
- Once paired, LED turns blue.
Device is ready for calls and
media streaming.
Check on your mobile connection list
- EXO-COM
LED Blink
Manual Download
https://scorpionsports.eu/
Warranty Contact
https://uclear.eu/en/
The last unit to pair continues
to blink purple for 15 secs
before system ends the pairing
process.
Optional: Press POWER once
on the last unit blinking purple
to end pairing manually.
4
Press POWER on any EXO-COM
device to initiate pairing process.
The units will blink green once
they are connected.
3
Intercom Pairing(other brand) Setup
From OFF MODE,
Press POWER until changes
to purple.
If the LED is purple, take off
your hand from the device, and
wait until LED turn green
Set other brand device on
“Universal intercom connection” mode or
“Phone pairing” mode
2
1
3
If the LED is green, you are
succesfully connected. If the LED is
purple, go back to step 1.
4