UCONNECT ® ACCESS USER’S MANUAL
SECTION TABLE OF CONTENTS PAGE 1 IDENTIFYING YOUR RADIO . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 1 2 SAFETY GUIDELINES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 2 3 UCONNECT威 ACCESS OVERVIEW . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13 3 4 UCONNECT威 3.0 . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Identifying Your Radio CONTENTS 䡵 Identifying Your Radio . . . . . . . . . . . . . . . . . . . . .
4 Identifying Your Radio Identifying Your Radio Uconnect威 5.0 Uconnect威 3.
Identifying Your Radio 5 Uconnect威 8.4A • Hands-free/Bluetooth威 • Touchscreen Climate Controls • SiriusXM™ • Embedded Connectivity (US Market Only) Uconnect威 8.4AN Key Features • 8.4” Touch-Screen • Navigation Standard • Hands-free/Bluetooth威 Key Features • Touchscreen Climate Controls NOTE: The 8.4A and 8.4AN appearance is the same, but • HD Radio the listed features provide the differences. • SiriusXM™ • 8.
Safety Guidelines CONTENTS 䡵 Safety Guidelines. . . . . . . . . . . . . . . . . . . . . . . . .
8 Safety Guidelines Safety Guidelines WARNING! ALWAYS drive safely with your hands on the wheel. You have full responsibility and assume all risks related to the use of the Uconnect威 features and applications in this vehicle. Only use Uconnect威 when it is safe to do so. Failure to do so may result in an accident involving serious injury or death. • Stop use immediately if a problem occurs. Failure to do so may cause injury or damage to the product. Return it to your authorized dealer to repair.
Safety Guidelines 9 • Driving is a complex activity that requires your full • Do not spray any liquid or caustic chemicals directly attention. If you’re engaged in driving or any activity on the screen! Use a clean and dry micro fiber lens that requires your full attention, we recommend that cleaning cloth in order to clean the touch screen. you not use your system.
10 Safety Guidelines FCC Declaration This device complies with Part 15 of the FCC Rules and with Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
Safety Guidelines 11 The internal wireless radio operates within guidelines found in radio frequency safety standards and recommendations, which reflect the consensus of the scientific community. The radio manufacturer believes the internal wireless radio is safe for use by consumers. The level of energy emitted is far less than the electromagnetic energy emitted by wireless devices such as mobile phones.
Uconnect姞 Access Overview CONTENTS 䡵 How to Register with Uconnect威 Access: . . . . . . .15 䡵 Uconnect威 Access In-Vehicle Connectivity Services. .18 䡵 Uconnect威 Access In-Vehicle Assistance Features . . .16 䡵 Uconnect威 Access Additional Information. . . . . . . .
14 Uconnect姞 Access Overview Uconnect威 Access (Available on Uconnect威 8.4A and Once registered, Uconnect威 Access customers can purchase packages and apps at any time. For additional information, Uconnect威 8.4AN) contact Uconnect威 Customer Care at 855-792-4241, or visit With Uconnect威 Access, owners have emergency and reOwner Connect (www.MoparOwnerConnect.com). mote vehicle features available. These features include 9-1-1 Call, Roadside Assistance, Uconnect威 Care and Vehicle Care.
Uconnect姞 Access Overview 15 4. You will receive a secured registration email from Uconnect威 Access containing a link for completing 1. With the vehicle parked and the radio powered on, your Uconnect威 Access Registration on-line. For secuselect the “Apps” soft-key located near the bottom of rity reasons, this email link will be valid for 24 hours. the radio touch screen. 5. Follow the link to complete the final step of registra2.
16 Uconnect姞 Access Overview Uconnect姞 Access In-Vehicle Assistance Features ASSIST Call With Uconnect威 Access, your vehicle has an on-board assistance feature located on the rear view mirror designed to enhance your driving experience if you should ever need assistance or support. The rear view mirror contains an ASSIST push button which automatically connects the vehicle occupants to one of several predefined destinations for immediate support: 1.
Uconnect姞 Access Overview 17 2. Uconnect威 Customer Care – In-vehicle support for 9–1–1 Call Uconnect威 Access System, Apps and Features. Places a direct call to local 9–1–1 emergency authority. 3. Vehicle Customer Care – Total support for your Chrysler Group vehicle.
18 Uconnect姞 Access Overview Please refer to your Uconnect威 Access account for information on available subscriptions, applications and packages for your vehicle. For additional information, contact Uconnect威 Access brings the power of the internet into your vehicle with exciting features, remote capabilities, Uconnect威 Customer Care at 855-792-4241, or visit Owner Connect (www.MoparOwnerConnect.com).
Uconnect姞 Access Overview 19 Uconnect姞 Access Additional Information My Uconnect威 Account To use the Uconnect威 Features and Services, you must first register your vehicle with Uconnect威 Access. Please refer to the “Register with Uconnect Access” section of this User’s Manual to start registration. Once registered, you can personalize your vehicle Uconnect威 System as desired. How to Purchase or Cancel an App From your Uconnect威 Access Account, you can easily purchase or cancel Applications or subscriptions.
Uconnect姞 3.0 CONTENTS 䡵 Uconnect威 3.0 System . . . . . . . . . . . . . . . . . . . . .22 䡵 Media Mode . . . . . . . . . . . . . . . . . . . . . . . . . . .27 䡵 Radio Mode. . . . . . . . . . . . . . . . . . . . . . . . . . . .
22 Uconnect姞 3.0 Uconnect姞 3.0 System 2. INFO Press the INFO button for an RDS station (one with call letters displayed). The radio will return a Radio Text message broadcast from an FM station (FM mode only). 3. A-B-C Press the A-B-C hard-key to select the A, B or C preset list. 4. ENTER/BROWSE & TUNE/SCROLL 1. RADIO Press the ENTER/BROWSE button to accept a highlighted selection on the screen. Rotate the TUNE/ SCROLL rotary knob to scroll through a list or tune a radio station. 5.
Uconnect姞 3.0 23 6. BACK 11. ON/VOLUME Press the BACK button to return to a previous menu or Push the ON/VOLUME control knob to turn on the screen. radio. Push the ON/VOLUME control knob a second time to turn off the radio. 7. MENU The electronic volume control turns continuously (360 Press the MENU button allows to scroll between the degrees) in either direction without stopping. Turning the setting sub-menus. ON/VOLUME control knob to the right increases the 8.
24 Uconnect姞 3.0 Radio Mode Enter/Browse & Tune/Scroll Control The radio is equipped with the following modes: • AM • Turn the rotary TUNE/SCROLL control knob clockwise to increase or counterclockwise to decrease the radio station frequency. Push the ENTER/BROWSE button to choose a selection. • SXM Sirius XM™ Satellite Radio (if equipped) Seek Functions • FM Touch the RADIO button, to enter the Radio Mode.
Uconnect姞 3.0 25 Seek Down SiriusXM™ Satellite Radio Mode • Touch and release the Seek Down button to tune the SiriusXM™ Satellite Radio uses direct satellite-to-receiver radio to the next listenable station or channel. broadcasting technology to provide clear digital sound, • During a Seek Down function, if the radio reaches the coast to coast. The subscription service provider is starting station after passing through the entire band SiriusXM™ Satellite Radio.
26 Uconnect姞 3.0 serviceterms. SiriusXM™ Radio U.S. service only avail- Mid, Bass, Fade, Balance able to those at least 18 years of age in the 48 contiguous • Select the desired setting to adjust, then touch the United States, D.C., and PR. Service available in Canada; Enter/Browse button. Turn the Tune/Scroll knob to see www.siriuscanada.ca. adjust the setting + or - 9. Press the back button when This functionality is only available for radios equipped done. with a Satellite receiver.
Uconnect姞 3.0 27 Fast Seek Down: Touch and hold the left arrow soft-key and the desired mode will begin to rewind through the Media Mode is entered by touching the Media button current track until the soft-key is released. located on the side of the display. Once in Media Mode, select your media Source by rotating the Scroll rotary Source knob and pushing the Enter button. Touch the Source soft-key to select the desired audio Common Media Functions source, Disc, AUX or USB/iPod威.
28 Uconnect姞 3.0 Audio Refer to Radio Mode for adjusting the audio settings. Disc Mode If you insert a Disc with the ignition ON and the radio ON, the unit will switch to CD/Disc mode and begin to play when you insert the Disc. The display will show the track number, and index time in minutes and seconds. Play will begin at the start of track 1. If equipped, your vehicle may have a remote Disc player located in the lower center console storage bin.
Uconnect姞 3.0 29 Once the desired selection is made you can chose from the available media by touching the soft-key. Touch the exit USB/iPod威 Mode is entered by either inserting a USB soft-key if you wish to cancel the browse function. Jump Drive or iPod威 cable into the USB port or by touching the Media button located left of the display. AUX Mode Once in Media Mode, touch the source soft-key and select AUX Mode is entered by inserting a AUX device using a USB/iPod威. cable with a 3.
30 Uconnect姞 3.0 Controlling the Auxiliary Device The control of the auxiliary device (e.g., selecting playlists, play, fast forward, etc.) cannot be provided by the radio; use the device controls instead. Adjust the volume with the ON/OFF VOLUME rotary knob, or with the volume of the attached device. NOTE: The vehicle radio unit is acting as the amplifier for audio output from the Auxiliary device.
Uconnect姞 5.0 CONTENTS 䡵 Uconnect威 5.0 System . . . . . . . . . . . . . . . . . . . . .32 䡵 Uconnect威 Voice Command. . . . . . . . . . . . . . . . .47 䡵 Radio Mode. . . . . . . . . . . . . . . . . . . . . . . . . . . .34 䡵 Settings Main Menu . . . . . . . . . . . . . . . . . . . . . .51 䡵 Media Mode . . . . . . . . . . . . . . . . . . . . . . . . . . .39 䡵 More Main Menu . . . . . . . . . . . . . . . . . . . . . . . .52 䡵 Uconnect威 Phone . . . . . . . . . . . . . . . . . . . . . . . .
32 Uconnect姞 5.0 Uconnect姞 5.0 System 2. COMPASS Press the COMPASS hard-key to display the current direction of the vehicle. 3. SETTINGS Press the SETTINGS hard-key to access the Settings list. Clock, Display, Audio, Bluetooth and Sirius Settings are described in this manual. 4. MORE Press the MORE hard-key to access additional options. 5. ENTER/BROWSE & TUNE/SCROLL Press the ENTER/BROWSE button to accept a highlighted selection on the screen.
Uconnect姞 5.0 33 6. BACK 9. PHONE Press the BACK button to return to a previous menu or Press the Phone button to access the Uconnect威 Phone screen. feature. 7. SCREEN OFF 10. MEDIA Press the SCREEN OFF hard-key to turn the touch-screen Pressing the MEDIA button will allow you to switch to OFF. To turn the screen back ON, just touch the screen. Media mode (CD, USB/iPOD, AUX, Bluetooth). 8. VOLUME & MUTE Rotate the rotary knob to adjust the Volume. Press the Mute button to mute the system.
34 Uconnect姞 5.0 Radio Mode Enter/Browse & Tune/Scroll Control The radio is equipped with the following modes: • AM • Turn the rotary TUNE/SCROLL control knob clockwise to increase or counterclockwise to decrease the radio station frequency. Push the ENTER/BROWSE button to choose a selection. • SXM Sirius XM™ Satellite Radio (if equipped) Seek Functions • FM Touch the RADIO hard-key, to enter the Radio Mode.
Uconnect姞 5.0 35 Fast Seek Up Setting Presets • Touch and hold the Seek Up soft-key to advance the The Presets are available for all Radio Modes, and are radio through the available stations or channels at a activated by touching any of the four Preset soft keys, faster rate, the radio stops at the next available station located at the top of the screen. or channel when the soft-key is released.
36 Uconnect姞 5.0 coast to coast. The subscription service provider is SiriusXM™ Satellite Radio. This service offers over 130 channels of music, sports, news, entertainment, and programming for children, directly from its satellites and broadcasting studios. A one-year SiriusXM™ Satellite Radio subscription is included. This functionality is only available for radios equipped with a Satellite receiver. In order to receive satellite radio, the vehicle needs to be outside with a clear view to the sky.
Uconnect姞 5.0 37 Equalizer Loudness • Touch the Equalizer soft-key to adjust the Bass, Mid • Touch the Loudness soft-key to select the Loudness feature. When this feature is activated it improves and Treble. Use the + or - soft-key to adjust the sound quality at lower volumes. equalizer to your desired settings. Press the back arrow soft-key when done.
38 Uconnect姞 5.0 2. Touch the Up or Down arrows to adjust the hours or minutes, next select the AM or PM soft-key. You can also select 12hr or 24hr format by touching the desires soft-key. 3. Once the time is set press the “Done” soft-key to exit the time screen.
Uconnect姞 5.0 39 Fast Seek Down: Touch and hold the left arrow soft-key and the desired mode will begin to rewind through the Media Mode is entered by touching the Media hard-key current track until the soft-key is released. located on the side of the display. Once in Media Mode, touch Source soft-key and the desired mode soft-key. Source Disc, USB, AUX and Bluetooth are the Media sources Touch the Source soft-key to select the desired audio available. source, Disc, AUX or USB/iPod威.
40 Uconnect姞 5.0 Audio If a Disc does not go into the slot more than 1.0 in (2.5 cm), a disc may already be loaded and must be ejected before a Refer to Operating Instructions – Radio Mode for adjustnew Disc can be loaded. ing the audio settings. If you insert a Disc with the ignition ON and the radio Disc Mode ON, the unit will switch to Disc mode and begin to play If Equipped, your vehicle may have a remote Disc player when you insert the Disc.
Uconnect姞 5.0 41 A Disc can be ejected with the radio and ignition OFF. Browse USB/iPod威 Mode Touch the Browse soft-key to select Artist, Albums, Genres, Songs, Playlists or Folders from the USB/iPod威 device. Once the desired selection is made you can chose from the available media by touching the soft-key. Touch the exit soft-key if you wish to cancel the browse function.
42 Uconnect姞 5.0 Inserting Auxiliary Device Bluetooth威 Mode Gently insert the Auxiliary device cable into the AUX Bluetooth威 Streaming Audio (BTSA) or Bluetooth威 Mode Port. If you insert a Auxiliary device with the ignition is entered by pairing a Bluetooth威 device, containing ON, the unit will switch to AUX mode and begin to play music, to the Uconnect威 Access system. when you insert the device cable.
Uconnect姞 5.0 43 Uconnect姞 Phone Pairing a Phone The Uconnect威 Phone is a voice-activated, hands-free, To use the Uconnect威 Phone feature, you must first pair in-vehicle communications system with Voice Command your Bluetooth威 phone with the Uconnect威 system. Refer Capability (see Voice Command section). to www.UconnectPhone.com for pairing procedure unique to your phone. The Uconnect威 Phone allows you to dial a phone number with your mobile phone using simple voice commands.
44 Uconnect姞 5.0 • If your phone asks you to accept a connection request from Uconnect, select “Yes”. If available, check the box • Uconnect威 Phone will say ⬙Start pairing procedure on telling it not to ask again – that way your phone will device⬙ automatically connect each time you start the vehicle. • Search for available devices on your Bluetooth威 enPhonebook Download – Phonebook Transfer From abled mobile phone. This is usually within Settings or Mobile Phone Options under “Bluetooth”.
Uconnect姞 5.0 45 • This downloaded phonebook cannot be edited or deleted on the Uconnect威 Phone. These can only be You may be asked for permission to initiate the phoneedited on the mobile phone. The changes are transbook download. ferred and updated to Uconnect威 Phone on the next phone connection. A maximum of 1000 entries per phone will be downloaded and updated every time a phone is connected Making A Phone Call to the Uconnect威 Phone. Press the “Phone” button.
46 Uconnect姞 5.0 Mute (Or Unmute) Microphone During Call Changing The Volume During a call, press the “Voice Command” button. Start a dialogue by pressing the “Phone” button , then adjust the volume during a normal call. (After the BEEP), say “mute” (or “mute off”). Transfer Ongoing Call Between Handset And Vehicle During a call, press the “Voice Command” button. (After the BEEP), say “transfer call”.
Uconnect姞 5.0 47 Uconnect姞 Voice Command Voice Command Operation The Uconnect威 Voice Command system allows you to Start a dialogue by pressing the “Voice Command” control your AM, FM, satellite radio, CD player, button , you will hear a beep. The beep is your signal to Uconnect威 Phone and supported portable media devices. give a command. Below are a list of voice commands for each of the different modes. When you press the “Voice Command” button located on the steering wheel, you will hear a beep.
48 Uconnect姞 5.0 Main Menu Radio AM, Radio FM Modes Common Voice Commands (Examples) “Radio AM” (to switch to the AM mode) “Radio FM” (to switch to the FM mode) “Satellite Radio” (to switch to the Satellite mode) “Disc” (to switch to the disc mode) “USB” (to switch to the USB mode) “Bluetooth Streaming” (to switch to the Bluetooth Streaming mode) “Memo” (to switch to the memo recorder) “System Setup” (to switch to system setup) “Frequency 97.1” (to change to radio station 97.
Uconnect姞 5.
50 Uconnect姞 5.0 Voice Text Reply (Text Messaging) If equipped with Uconnect威 Voice Command, your radio may be able to play incoming Short Message Service (SMS) messages (text messages) through the vehicle’s sound system. It also allows you to respond by selecting from various pre-defined phrases. Not all phones are compatible with this feature. Refer to the phone compatibility list at www.UconnectPhone.com. Connected mobile phones must be bluetooth-compatible, and paired with your radio.
Uconnect姞 5.0 51 • Heated Seats — Refer to “Understanding The Features Of Your Vehicle”, “Seats” section in your vehicle Press the Settings hard-key to display the Settings Main Owner’s Manual for details. Menu. The Settings Main Menu contains the following options: • Engine Off Options — Refer to “Understanding Your Instrument Panel”, “Uconnect威 Access System” sec• Display — Refer to “Understanding Your Instrument tion in your vehicle Owner’s Manual for details.
52 Uconnect姞 5.0 More Main Menu Press the More hard-key to display the More Main Menu. The More Main Menu contains the following options: • Phone — Refer to the “Uconnect威 Phone” section in this manual for details. • Outlet (If Equipped) — Refer to “Understanding The Features Of Your Vehicle”, “Power Inverter” section in your vehicle Owner’s Manual for details. • Time — Refer to the Uconnect威 5.0 “Radio Mode” section in this manual for details.
Uconnect姞 8.4A CONTENTS 䡵 Uconnect威 8.4A System. . . . . . . . . . . . . . . . . . . .55 䡵 Media Mode . . . . . . . . . . . . . . . . . . . . . . . . . . .70 䡵 Radio Mode. . . . . . . . . . . . . . . . . . . . . . . . . . . .57 ▫ Disc Mode . . . . . . . . . . . . . . . . . . . . . . . . . . .70 ▫ Setting Presets . . . . . . . . . . . . . . . . . . . . . . . .183 ▫ USB/iPod威 Mode . . . . . . . . . . . . . . . . . . . . . .71 ▫ SiriusXM™ Satellite Radio Mode . . . . . . . . . . .60 ▫ AUX Mode . . . . . .
54 Uconnect姞 8.4A ▫ Phone Call Features. . . . . . . . . . . . . . . . . . . . .89 ▫ Main Menu . . . . . . . . . . . . . . . . . . . . . . . . . .124 ▫ Uconnect威 Phone Features . . . . . . . . . . . . . . . .94 ▫ Where To?. . . . . . . . . . . . . . . . . . . . . . . . . . .125 ▫ Advanced Phone Connectivity . . . . . . . . . . . . .97 ▫ View Map . . . . . . . . . . . . . . . . . . . . . . . . . . .154 ▫ Things You Should Know About Your Uconnect威 Phone . . . . . . . . . . . . . . . . . . . . . .
Uconnect姞 8.4A 55 Uconnect姞 8.4A System 2. Media Touch the Media soft-key to access media sources such as: Disc, USB Device and AUX as long as the requested media is present. 3. Climate Refer to Climate Controls in your vehicles Owner’s Manual for further details. 4. Nav (If Equipped) The Uconnect威 8.4A System is Navigation-ready, see your authorized dealer for details. 5. Phone 1. Radio Touch the Phone soft-key to access the Uconnect威 Phone Touch the Radio soft-key to enter the Radio Mode. The feature.
56 Uconnect姞 8.4A 6. Apps 9. BACK Touch the Apps soft-key to access Smartphone and Press the BACK button to return to a previous menu or Connected vehicle options. screen. 7. Settings 10. SCREEN OFF Touch the Settings soft-key to display the list of available Press the SCREEN OFF hard-key to turn the touch-screen settings. Refer to Understanding Your Instrument Panel OFF. To turn the screen back ON, just touch the screen. section in your vehicles Owner’s Manual for further 11. VOLUME & MUTE details.
Uconnect姞 8.4A 57 Radio Mode The radio is equipped with the following modes: • FM • AM • SiriusXM™ Satellite Radio (if equipped) The electronic volume control turns continuously (360 degrees) in either direction, without stopping. Turning the Volume control knob clockwise increases the volume, and counter-clockwise decreases it. When the audio system is turned on, the sound will be set at the same volume level as last played.
58 Uconnect姞 8.4A Seek and Direct Tune Functions Seek Down The Seek Up and Down functions are activated by touching the double arrow soft-keys to the right and left of the radio station display, or by pressing the left Steering Wheel Audio Control (if equipped) up or down. Touch and release the Seek Down soft-key to tune the radio to the next listenable station or channel.
Uconnect姞 8.4A 59 Press the available number soft-key to begin selecting a desired station. Once a number has been entered, any numbers that are no longer possible (stations that cannot be reached) will become deactivated / grayed out. Setting Presets The Presets are available for all Radio Modes, and are activated by touching any of the six Preset soft keys, located at the top of the screen.
60 Uconnect姞 8.4A Browse in AM/FM Deleting Presets When in either AM or FM, the Browse Screen provides a A Preset can be deleted in the Presets Browse screen by means to edit the Presets List and is entered by touching touching the Trash Can Icon for the corresponding Preset. the browse soft key. Return to Main Radio Screen Scrolling Preset List You can return to the Main Radio Screen, by touching the Once in the Browse Presets screen, you can scroll the X soft key when in the Browse Presets screen.
Uconnect姞 8.4A 61 SiriusXM™ and all related marks and logos are trademarks of SiriusXM™ Radio Inc. and its subsidiaries. SiriusXM™ Radio requires a subscription, sold separately after trial subscription included with vehicle purchase. Prices and programming are provided by SiriusXM™ and are subject to change. Subscriptions governed by Terms & Conditions available at sirius.com/ serviceterms. SiriusXM™ Radio U.S. service only available to those at least 18 years of age in the 48 contiguous United States, D.
62 Uconnect姞 8.4A • The Genre is displayed below the Presets Bar. Replay • The SiriusXM™ Channel Number is displayed in the The replay function provides a means to store and replay up to 22 minutes of music audio and 48 minutes of talk center. radio. Once the channel is switched, content in replay • The Program Information is displayed at the bottom of memory is lost the Channel Number. Touch the replay soft-key.
Uconnect姞 8.4A 63 Rewind Favorites Touch the RW soft-key to rewind the content in steps of 5 seconds. Touching the RW soft-key for more than 2 seconds rewinds the content. The Radio begins playing the content at the point at which the touch is released. Touch the fav. soft-key to activate the favorites menu, which will time out in 5 seconds in absence of user interaction. Forward Each touch of the FW soft-key forwards the content in steps of 5 seconds.
64 Uconnect姞 8.4A Fav. Song While the song is playing to set a Favorite Song, This Screen contains many sub menus. You can exit a sub menu to get back to a parent menu by a touch of the Back touch the fav. soft-key and then the Fav Song soft-key. Arrow. Traffic & Weather All Touch the Traffic & Weather soft-key to tune to a SiriusXM™ Traffic and Weather channel. To set a Traffic Touch the All soft-key at the left of the Browse Screen.
Uconnect姞 8.4A 65 Presets Favorites Touch the Presets soft-key located at the left of the Touch the Favorites soft-key, located at the left of the Browse screen. Browse screen. You can scroll the Presets list touching the up and down arrows, located at the right side of the screen. Scrolling can also be done by operating the Tune/Scroll Knob as well.
66 Uconnect姞 8.4A Alert Settings Select Teams Touch the Alert Setting tab at the top of the screen. The Alert Settings menu allows you to choose from a Visual alert or Audible and Visual alert when one of your favorites is airing on any of the SiriusXM™ channels. Touch the Select Teams soft-key to activate the League Scroll list. Touch the chosen league and a scroll list of all teams within the league will appear, then you can select a team by touching the corresponding box.
Uconnect姞 8.4A 67 Alert Settings Balance/Fade Touch the Alert Setting tab at the top of the screen. The Alert Settings menu allows you to choose from “Alert me to on-air games upon start” or “Alert upon score update” or both when one or more of your selections is airing on any of the SiriusXM™ channels. Audio Touch of the Audio soft-key to activate the Audio settings screen to adjust Balance\Fade, Equalizer, And Speed Adjusted Volume.
68 Uconnect姞 8.4A Equalizer Speed Adjusted Volume Touch the Equalizer soft-key to activate the Equalizer Touch the Speed Adjusted Volume soft-key to activate the Speed Adjusted Volume screen. screen. Touch the + or - soft-keys, or by touching and dragging over the level bar for each of the equalizer bands. The level value, which spans between ±9, is displayed at the bottom of each of the Bands.
Uconnect姞 8.4A 69 The Speed Adjusted Volume is adjusted by touching of the + and - buttons or by touching, and dragging over the Level Bar This alters the automatic adjustment of the audio volume with variation to vehicle speed. Volume increases automatically as speed increase to compensate for normal road noise. Surround System (If Equipped) Touch the On soft-key to activate Surround Sound. Touch Off to deactivate this feature.
70 Uconnect姞 8.4A Browse Touch the browse soft-key to display the browse window. Disc Mode The left side of the browse window displays a list of ways Overview you can browse through the contents of the Disc. If Disc Mode is entered by either inserting a Disc or touch supported by the device, you can browse by Folders, the Disc soft-key on the left side of the display. Once in Artists, Playlists, Albums, Songs, etc. Touch the desired Media Mode, touch the source soft-key and select Disc.
Uconnect姞 8.4A 71 Repeat Touch the repeat soft-key to toggle the repeat functionality. The Repeat soft-key is highlighted when active. The Radio will continue to play the current track, repeatedly, as long as the repeat is active. Shuffle USB/iPod姞 Mode Overview USB/iPod威 Mode is entered by either inserting a USB device or iPod威 and cable into the USB Port or touch the iPod威 soft-key on the left side of the display. Once in Media Mode, touch the source soft-key and select iPod威.
72 Uconnect姞 8.4A Browse Repeat Touch the browse soft-key to display the browse window. The left side of the browse window displays a list of ways you can browse through the contents of the USB device/ iPod威. If supported by the device, you can browse by Folders, Artists, Playlists, Albums, Songs, etc. Touch the desired soft-key on the left side of the screen. The center of the browse window shows items and it’s subfunctions, which can be scrolled by touching the Up and Down soft-keys to the right.
Uconnect姞 8.4A 73 touch the AUX soft-key on the left side of the display. Once in Media Mode, touch the source soft-key and select Touch the trks soft-key to display a pop up with the Song AUX. List. The currently playing song is indicated by an arrow and lines above and below the song title. When in the Inserting Auxiliary Device Tracks List screen you can rotate the TUNE/SCROLL Gently insert the Auxiliary device cable into the AUX knob to highlight a track (indicated by the line above and Port.
74 Uconnect姞 8.4A NOTE: The vehicle radio unit is acting as the amplifier for audio output from the Auxiliary device. Therefore if the volume control on the Auxiliary device is set too low, there will be insufficient audio signal for the radio unit to play the music on the device. Source SD Card Mode Overview SD Card Mode is entered by either inserting a SD Card into the USB Port or touch the SD Card soft-key on the left side of the display.
Uconnect姞 8.4A 75 supported by the device, you can browse by Folders, Artists, Playlists, Albums, Songs, etc. Touch the desired soft-key on the left side of the screen. The center of the browse window shows items and it’s sub-functions, which can be scrolled by touching the Up and Down soft-keys to the right. The Scroll/Tune knob can also be used to scroll. Shuffle Touch the shuffle soft-key to play the selections on the SD Card device in random order to provide an interesting change of pace.
76 Uconnect姞 8.4A Touching the trks soft-key while the pop up is displayed Seek Up/Down will close the pop up. Touch and release the right arrow soft-key for the next selection on the Bluetooth威 device. Touch and release the Audio left arrow soft-key to return to the beginning of the Refer to Radio Mode for adjusting the audio settings. current selection, or return to the beginning of the Bluetooth姞 Mode previous selection if the Bluetooth威 device is within the first second of the current selection.
Uconnect姞 8.4A 77 Touching the trks soft-key while the pop up is displayed will close the pop up. Audio Refer to Radio Mode for adjusting the audio settings.
78 Uconnect姞 8.4A Uconnect姞 Phone Uconnect姞 Phone Overview Uconnect威 Phone is a voice-activated, hands-free, invehicle communications system. Uconnect威 Phone allows you to dial a phone number with your mobile phone. Uconnect威 Phone supports the following features: Voice Activated Features: • Calling Back the last incoming call number (“Call Back”). • View Call logs on screen (“Show incoming calls”, “Show Outgoing calls”, “Show missed Calls”, “Show Recent Calls”).
Uconnect姞 8.4A 79 • Sending a text message via the touch-screen. • Listen to Music on your Bluetootht Device via the touch-screen. • Pairing up to 10 phones/audio devices for easy access to connect to them quickly. NOTE: Your phone must be capable of SMS messaging via Bluetooth威 for messaging features to work properly. vehicle and enables you to mute the system’s microphone for private conversation.
80 Uconnect姞 8.4A system. Only one linked (or paired) mobile phone and your vehicle is equipped. Please see the Uconnect威 Voice one audio device can be used with the system at a time. Command section for direction on how to use the button. The system is available in English, Spanish, or French languages. The Uconnect威 Phone is fully integrated with the vehicle’s audio system.
Uconnect姞 8.4A 81 You will be prompted for a specific command and then guided through the available options. “John Smith”. Please remember, the Uconnect威 Phone works best when you talk in a normal conversational tone, as if speaking to someone sitting a few feet/ meters away from you. • Prior to giving a voice command, one must wait for the beep, which follows the “Listen” prompt or another Natural Speech prompt.
82 Uconnect姞 8.4A do you want to call?” in the case where a phone call was requested but the specific name was not recognized. Cancel Command At any prompt, after the beep, you can say “Cancel” and The system utilizes continuous dialog; when the system you will be returned to the main menu. requires more information from the user it will ask a You can also press the or buttons when the question to which the user can respond without pressing system is listening for a command and be returned to the button.
Uconnect姞 8.4A 83 NOTE: • You must have Bluetooth威 enabled on your phone to complete this procedure. • The vehicle must be in PARK. • Search for available devices on your Bluetooth威 enabled mobile phone. When prompted on the phone, enter the name and PIN shown on the Uconnect威 screen, • See Step 4 to complete the process. 1. Press the “Phone” soft-key on the screen to begin. 4. Uconnect威 Phone will display an in progress screen while the system is connecting. 2.
84 Uconnect姞 8.4A • Search for available devices on your Bluetooth威 enabled mobile phone.
Uconnect姞 8.4A 85 You can also use the following VR commands to bring up • Uconnect威 Phone will display an in process screen the Paired Phone screen from any screen on the radio: while the system is connecting, • “Show Paired Phones” or • “Connect My Phone” Pair A Bluetooth威 Streaming Audio Device • Touch the “Player” or “Media” soft-key to begin, • When the pairing process has successfully completed, the system will prompt you to choose whether or not this is your favorite device.
86 Uconnect姞 8.4A Connecting To A Particular Mobile Phone Or Audio Device • Touch the + soft-key located to the right of the device name, Uconnect威 Phone will automatically connect to the high- • The options pop-up will be displayed, est priority paired phone and/or Audio Device within • Touch the “Disconnect Device” soft-key, range. If you would need to choose a particular phone or Audio Device follow these steps: • Touch the X to exit out of the Settings screen.
Uconnect姞 8.4A 87 Making A Phone Or Audio Device A Favorite • Touch the “Settings” soft-key, • Touch the “Phone/Bluetooth威” soft-key, phonebook. Specific Bluetooth威 Phones with Phone Book Access Profile may support this feature. See Uconnect威 website for supported phones. • To call a name from a downloaded mobile phonebook, follow the procedure in “Call by Saying a Name” • Touch the + soft-key located to the right of the device section.
88 Uconnect姞 8.4A • Only the phonebook of the currently connected mobile 2. After loading the mobile phonebook, select phonebook from the Phone main screen, then select the phone is accessible. appropriate number. Touch the + next to the selected • This downloaded phonebook cannot be edited or number to display the options pop-up. In the pop-up deleted on the Uconnect威 Phone. These can only be select “Add to Favorites”. edited on the mobile phone.
Uconnect姞 8.4A 89 To Remove A Favorite Ways To Initiate A Phone Call • To remove a Favorite, select phonebook from the Listed below are all the ways you can initiate a phone call Phone main screen. with Uconnect威 Phone. • Next select Favorites on the left side of the screen and • Redial then touch the + Options soft-key. • Dial by touching in the number • Touch the + next to the Favorite you would like to • Voice Commands (Dial by Saying a Name, Call by remove.
90 Uconnect姞 8.4A Dial By Saying A Number Call Controls • Press the The touch-screen allows you to control the following call features: button to begin, • After the “Listening” prompt and the following beep, • Answer say “Dial 248-555-1212”, • The Uconnect威 Phone will dial the number 248-555-1212.
Uconnect姞 8.4A 91 Touch-Tone Number Entry • Missed Calls • Touch the “Phone” soft-key, • All Calls • Touch the “Dial” soft-key, These can be accessed by touching the “recent calls” soft-key on the Phone main screen. • The Touch-Tone screen will be displayed, You can also press the button and say “Show my • Use the numbered soft-keys to enter the number and incoming calls” from any screen and the Incoming calls touch “Call”. will be displayed.
92 Uconnect姞 8.4A if on, and will ask if you would like to answer the call. button to accept the call. To ignore the call, Press the touch the “Ignore” soft-key on the touch-screen. You can also touch the “answer” soft-key or touch the caller ID box.
Uconnect姞 8.4A 93 Toggling Between Calls Redial If two calls are in progress (one active and one on hold), • Press the “Redial” soft-key, touch the “Swap” soft-key on the Phone main screen. and after the “Listening” prompt and • or press the Only one call can be placed on hold at a time. the following beep, say “Redial”, button to toggle between the You can also press the • After the “Listening” prompt and the following beep, active and held phone call.
94 Uconnect姞 8.4A Uconnect姞 Phone Features Voice Mail Calling Roadside Assistance To learn how to access your voice mail, refer to “Working with Automated Systems”. If you need roadside assistance: • Press the button to begin. Working With Automated Systems • After the “Listening” prompt and the following beep, This method is used in instances where one generally has to press numbers on the mobile phone keypad while say “Roadside Assistance”. navigating through an automated telephone system.
Uconnect姞 8.4A 95 if required to enter your PIN followed with a pound, (3 7 • You may not hear all of the tones due to mobile phone 4 6 #), you can press the button and say, “Send 3 7 4 network configurations. This is normal. 6 #”.
96 Uconnect姞 8.4A Voice Response Length It is possible for you to choose between Brief and Detailed Voice Response Length. • Touch the “More” soft-key (where available), then touch the “Settings” soft-key, • Touch the “Display” soft-key, then scroll down to Voice Response Length, Dialing Using The Mobile Phone Keypad WARNING! Your new vehicle has many features for the comfort and convenience of you and your passengers.
Uconnect姞 8.4A 97 NOTE: Certain brands of mobile phones do not send the dial ring to the Uconnect威 Phone to play it on the vehicle audio system, so you will not hear it. Under this situation, after successfully dialing a number the user may feel that the call did not go through even though the call is in progress. Once your call is answered, you will hear the audio.
98 Uconnect姞 8.4A Things You Should Know About Your Uconnect姞 Phone Voice Command • smooth road surface, • fully closed windows, • dry weather condition. • For best performance, adjust the rearview mirror to • Even though the system is designed for users speaking provide at least ½ in (1 cm) gap between the overhead in North American English, French, and Spanish acconsole (if equipped) and the mirror. cents, the system may not always work for some. • Always wait for the beep before speaking.
Uconnect姞 8.4A 99 • Even though international dialing for most number • Performance, such as audio clarity, echo, and loudness to a large degree rely on the phone and network, and combinations is supported, some shortcut dialing not the Uconnect威 Phone. number combinations may not be supported. • In a convertible vehicle, system performance may be • Echo at the far end can sometimes be reduced by lowering the in-vehicle audio volume. compromised with the convertible top down.
100 Uconnect姞 8.4A NOTE: Uconnect威 Phone Voice Texting is only available • Touch the “messaging” soft-key then “New Message”, when the vehicle is not in moving.
Uconnect姞 8.4A 101 While the list of defined messages are being read, you can 8. Thanks. button and interrupt the system by pressing the 9. I’ll be late. saying the message you want to send. 10. I will be minutes late. After the system confirms that you want to send your message to John Smith, your message will be sent. 11. See you in minutes. List of Preset Messages: 12. Stuck in traffic. 1. Yes. 13. Start without me. 2. No. 14. Where are you? 3. Okay. 15. Are you there yet? 4.
102 Uconnect姞 8.4A Bluetooth威 Communication Link Mobile phones have been found to lose connection to the Uconnect威 Phone. When this happens, the connection can generally be reestablished by switching the phone OFF/ON. Your mobile phone is recommended to remain in Bluetooth威 ON mode. Power-Up After switching the ignition key from OFF to either the ON or ACC position, or after a language change, you must wait at least 15 seconds prior to using the system.
Uconnect姞 8.
104 Uconnect姞 8.4A • Send dial tones for automated systems is available while a call is active. This is an example that uses a You can replace “John Smith” with any name in your Phonebook Record named “Voicemail Password.” mobile or favorite phone book. You can also say “Send a message to John Smith” and the system will ask you • Storing Dial tones in contact names is possible but only which phone number you want to send a message to the first number encountered in a contact name will be sent.
Uconnect姞 8.4A 105 NOTE: Available Voice Commands are shown in bold face and underlined in the gray shaded boxes.
106 Uconnect姞 8.
Uconnect姞 8.4A 107 NOTE: • You can replace “248 555 1212” with any phone number supported by your Mobile phone. • You can replace “John Smith” with any name in your mobile or favorite phone book. You can also say “Send • You can replace “4” with any message number shown a message to John Smith” and the system will ask you on the screen. which phone number you want to send a message to • If your phone does not support phonebook download for John Smith.
108 Uconnect姞 8.
Uconnect姞 8.4A 109 NOTE: Available Voice Commands are shown in bold General Information face and underlined in the gray shaded boxes. This device complies with Part 15 of the FCC rules and RSS 210 of Industry Canada. Operation is subject to the following conditions: • Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. • This device may not cause harmful interference.
110 Uconnect姞 8.4A Uconnect姞 Voice Command Voice Command Overview The Uconnect威 Voice Command system allows you to control your AM, FM radio, satellite radio, disc player, SD Card, USB/iPod and Sirius Travel Link. WARNING! ALWAYS drive safely with your hands on the wheel. You have full responsibility and assume all risks related to the use of the Uconnect威 features and applications in this vehicle. Only use Uconnect威 when it is safe to do so.
Uconnect姞 8.4A 111 If a command is not spoken a second time, the system will respond with an error and give some direction as what can be said based on the context you are in. After three consecutive failures of a spoken command the VR session with end. The system will best recognize your speech if the windows are closed, and the heater/air conditioning fan is set to low. button Pressing the Uconnect威 Voice Command while the system is speaking is known as “barging in.
112 Uconnect姞 8.4A Smith”. For multiple inputs in the same phrase or sen- Changing the Volume tence, the system identifies the topic or context and 1. Start a dialogue by pressing the Voice Command provides the associated follow-up prompt such as “Who button. do you want to call?” in the case where a phone call was 2. Say a command (e.g., “Help”). requested but the specific name was not recognized. The system utilizes continuous dialog; when the system 3.
Uconnect姞 8.4A 113 Disc To switch to the disc mode, say “Change source to Disc”.
114 Uconnect姞 8.
Uconnect姞 8.4A 115 NOTE: 1. You can replace “950 AM” with any other AM or FM frequency, such as “98.7 FM”. 2. You can replace “80’s on 8” with any other satellite station name received by the radio. 3. You can replace “8” with any other satellite station named received by the radio. 4. You can replace “rock” with any of the satellite music types. NOTE: Available Voice Commands are shown in bold face and shaded grey.
116 Uconnect姞 8.
Uconnect姞 8.4A 117 NOTE: 1. You can replace the album, artist, song, genre, playlist, podcast and audio book names with any corresponding names on the current device that is playing. 2. You can replace “8” with any track on the CD that is currently playing. Command is only available when CD is playing. 3. Playlist, Podcast and audio book commands are only available when the iPod is connected and playing. 4. VR commands, Albums, Artists, and Genre names are based on the music database provided by Gracenote.
118 Uconnect姞 8.
Uconnect姞 8.4A 119 NOTE: 1. You can replace “NFL” with any league shown on the sports league screen. For example you can say “Show MLB headlines” or “Show PGA headlines”. 2. You can replace “Headlines” with any menu items shown on a league screen. For example you can say “Show NFL Schedule and results” or “Show NCAA Basketball AP top 25” or “Show Major League Baseball Teams”. 3.
120 Uconnect姞 8.
Uconnect姞 8.4A 121 NOTE: 1. Only available with Navigation equipped vehicles. 2. You can replace “Player” with “Radio”, “Navigation”, “Phone”, “Climate”, “More” or “Settings”. 3. Navigation commands only work if equipped with Navigation. NOTE: Available Voice Commands are shown in bold face and shaded grey.
122 Uconnect姞 8.
Uconnect姞 8.4A 123 NOTE: 1. You can also say “Find City”, “Find Favorite”, “Find Play by Category”, “Find Play by Name”, “Find Recently Found”, “Where to?” or “Go Home”. 2. You can say “Find Nearest” then “Restaurant”, “Fuel”, “Transit”, “Lodging”, “Shopping”, “Bank”, “Entertainment”, “Recreation”, “Attractions”, “Community”, “Auto Services”, “Hospitals”, “Parking”, “Airport”, “Police Stations”, “Fire Stations”, or “Auto Dealers”. NOTE: Available Voice Commands are shown in bold face and shaded grey.
124 Uconnect姞 8.4A Navigation Main Menu Navigation Registration (Uconnect姞 8.4A Only) Uconnect威 8.4A is a Navigation-ready system, see your authorized dealer for details Getting Started To access the Navigation system, touch the Nav soft-key on bottom of the screen. • Touch Where To? to find or route to a destination. • Touch View Map to view the map.
Uconnect姞 8.4A 125 • Touch Information to view Traffic, Where Am I? and Where To? Trip Computer information • Touch Emergency to search for Hospitals, Police and Fire Stations near your current location. You can also display your current location and save any Emergency facility location to your Favorites. • Touch Stop to stop a route. • Touch Detour to detour a route. 6 From the Nav Main Menu, touch the Where To? soft-key and select one of the following methods to program a route guidance.
126 Uconnect姞 8.4A • Address • Intersection Touch this soft-key to search by a street address or a street Touch this soft-key to enter in two street names as a name with house number. destination. • Recent • Go Home Touch this soft-key to access previously routed addresses Touch this soft-key to program or confirm a route to the or locations. saved home address. • Point of Interest • GEO Coordinates Touch this soft-key when you want to route to a point of interest.
Uconnect姞 8.4A 127 • City Center Where To? – Address Touch this soft-key to route to a particular city. The To enter a destination by Address, follow these steps: navigation system will calculate a route with the destination at the center of the city. • Closest City Touch this soft-key to route to a nearby city. The navigation system will calculate a route with the destination at the center of the nearby city.
128 Uconnect姞 8.4A NOTE: To change the state and/or country, touch the 2. Touch Spell City or Spell Street to begin entering the state, country soft-key and follow the prompts to change address of your destination. the state and/or country. If you touch Spell City, you will have to enter and select/touch the desired city name, followed by the desired street name and lastly the house number.
Uconnect姞 8.4A 129 If you touch Spell Street, you will have to enter and select/touch the desired street name in the correct city and then you will have to enter the house number 3. Once the correct City, Street and Number has been entered, you will be asked to confirm your destination by touching OK. 4. Touch the Yes soft-key to confirm your destination and begin your route.
130 Uconnect姞 8.4A You can touch the back arrow soft-key to return to the previous screen or the X soft-key to exit. Where To? – Recent Touch the soft-key with the name of the desired destination. Confirm the route with Yes to start the route guidance. To route to a recent destination, touch the Recent soft-key To delete a destination from the list, touch the trash can icon soft-key. in the NAV Main Menu.
Uconnect姞 8.4A 131 The following Options are available for each destination: • Edit Name • Add Phone Number • Move Up in the list • Move Down in the list • Place Pin on the location (saves the spot on the list) NOTE: You can touch the back arrow soft-key to return to the previous screen or the X soft-key to exit. To display the options for a destination touch the Options soft-key that looks like a gear.
132 Uconnect姞 8.4A Where To? – Point of Interest To enter a destination by Point of Interest (POI) touch the Point of Interest soft-key in the Nav Main Menu. You have the following POIs to choose from: • Gas Stations • Restaurants The Point of Interest database allows you to select a destination from a list of locations and public places, or • Hotels/Motels points of interest (POI)s.
Uconnect姞 8.4A 133 • All POIs • Around Me • Spell POI Name • In a City You can also change your POI search area, by touching • Near Destination (only available during route guidance) the Change Search Area soft-key. You will have the • Along Route (only available during route guidance) following options to change your search area: NOTE: You can touch the back arrow soft-key to return to the previous screen or the X soft-key to exit.
134 Uconnect姞 8.4A Touch the desired Gas Station and touch Yes to confirm the destination. NOTE: If you are currently on a route guidance and you select a gas station, the system will ask you to choose one of the following: • Cancel previous route • Add as first destination • Add as last destination You can touch the back arrow soft-key to return to the previous screen or the X soft-key to exit. You can search for a gas station by the following categories, which are soft-key tabs at the top of the screen.
Uconnect姞 8.4A 135 You can search for a restaurants by the following categories, which are soft-key tabs at the top of the screen. You can touch the back arrow soft-key to return to the previous screen or the X soft-key to exit. • Name POI – Hotels/Motels • Distance To select a Hotel or Motel POI, touch Point of Interest from the Nav Main Menu, then touch the Point of Interest soft-key and then touch the Hotels/Motels soft-key.
136 Uconnect姞 8.4A NOTE: If you are currently on a route guidance and you • Type select a Hotel or Motel, the system will ask you to choose • ABC (Search) one of the following: Touch the desired ATM or Bank and touch Yes to confirm • Cancel previous route the destination.
Uconnect姞 8.4A 137 All POIs You can search through the available POI categories to find your desired POI. The available categories are: • ATM/Banking • Automotive • Coffee Shops • Community • Entertainment • Gas Stations To select a POI type, touch Point of Interest from the Nav • Health and Beauty Main Menu, then touch the Point of Interest soft-key and • Highway Exit then touch All POIs soft-key.
138 Uconnect姞 8.4A • Other • Parking • Recreation • Restaurants • Shopping • Travel • Truck Select a category and then select a subcategory if necessary. Touch the ABC soft-key to activate a keyboard with Alphabetic characters in order to search within the POI categories.
Uconnect姞 8.4A 139 Touch the desired POI and touch Yes to confirm the destination. NOTE: If you are currently on a route guidance and you select a POI, the system will ask you to choose one of the following: • Cancel previous route • Add as first destination • Add as last destination You can touch the back arrow soft-key to return to the previous screen or the X soft-key to exit.
140 Uconnect姞 8.4A To save a favorite destination, touch the Add Favorite Where To? – Intersection soft-key and follow the steps to route a destination. To enter a destination by Intersection, follow these steps: To display the options for a favorite destination touch the Options soft-key that looks like a gear.
Uconnect姞 8.4A 141 6 This menu shows the default country and state setting. 2. This menu shows the default country and state settings. NOTE: To change the state and/or country, touch the If you touch Spell City, you will have to enter and state, country soft-key and follow the prompts to change select/touch the desired city name, followed by the the state and/or country. desired street name and lastly you will have to enter the intersection street.
142 Uconnect姞 8.4A If you touch Spell Street, you will have to enter and Where To? – Go Home select/touch the desired street name in the correct city To enter your Home Address, follow these steps: and then you will have to enter the intersecting street. 3. Once the correct City and Intersection has been entered, you will be asked to confirm your destination. 4. Touch the Yes soft-key to confirm your destination and begin your route.
Uconnect姞 8.4A 143 2. To set your set your Home Address choose one of the 4. Touch the Save soft-key to confirm your destination following options: and begin the route to your Home Address. NOTE: Refer to the individual section of the chosen 5. This address will be saved as your Home Address and option for further information. it can be accessed by touching the Go Home soft-key in the Where To? Menu.
144 Uconnect姞 8.4A NOTE: You can touch the back arrow soft-key to return Touch the soft-key with the name of the desired Trip and touch the first destination in the list. Confirm the route by to the previous screen or the X soft-key to exit. touching Yes to start the route guidance. Where To? – Trips To add a Trip, follow these steps: 1. Touch the Create new Trip soft-key. 2. Type in the new Trip Name. 3. Touch Add Destination to add destinations to your trip. 4.
Uconnect姞 8.4A 145 • Intersection • GEO Coordinates • Point on Map • City Center • Closest Cities • Phone Number 5. Add more needed destinations to your trip. To display the options for a trip touch the Options soft-key that looks like a gear.
146 Uconnect姞 8.4A Where To? – GEO Coordinate 1. Enter the Latitude by typing in the numbers. Use the left and right arrows to select specific numbers in the To enter a destination by GEO Coordinate, touch Where location shown. To? in the Nav Main Menu and then touch the GEO 2. Touch the OK soft-key. Coordinate soft-key. 3. Enter the Longitude by typing in the numbers. Use the left and right arrows to select specific numbers in the location shown.
Uconnect姞 8.4A 147 NOTE: Touch the Format soft-key to change the format Where To? – Point on Map of the Latitude/Longitude entry. 4. Touch OK to confirm the destination. 5. Touch the Yes soft-key to confirm your destination and begin your route.
148 Uconnect姞 8.4A 3. Touch the Yes soft-key to confirm your destination and begin your route. NOTE: If you are currently on a route guidance and you select a Point on Map, the system will ask you to choose one of the following: • Cancel previous route • Add as first destination • Add as last destination 1. Use the touch-screen to drag the center of the cross over the desired destination. 2.
Uconnect姞 8.4A 149 Where To? – City Center 3. Touch the Yes soft-key to confirm your destination and begin your route. NOTE: If you are currently on a route guidance and you select a City Center, the system will ask you to choose one of the following: • Cancel previous route • Add as first destination • Add as last destination You can touch the back arrow soft-key to return to the previous screen or the X soft-key to exit.
150 Uconnect姞 8.4A Where To? – Closest City 1. Touch the desired city from the list. To enter a destination by Closest City, touch Where To? in 2. Touch the Yes soft-key to confirm your destination and the Nav Main Menu and then touch the Closest City begin your route. soft-key.
Uconnect姞 8.4A 151 NOTE: If you are currently on a route guidance and you Where To? – Phone select a Closest City, the system will ask you to choose one of the following: • Cancel previous route • Add as first destination • Add as last destination You can touch the back arrow soft-key to return to the previous screen or the X soft-key to exit. 6 To enter a destination by Phone number, touch Where To? in the Nav Main Menu and then touch the Phone Number soft-key. 1.
152 Uconnect姞 8.4A 2. Touch the desired destination from the list. Before Route Guidance 3. Touch the Yes soft-key to confirm your destination and Before confirming the route with the Yes soft-key, it is possible to select options different from the default route begin your route. settings.
Uconnect姞 8.4A 153 touch and release the desired setting until a check- NOTE: Since toll roads, tunnels and ferries are built for mark appears. the purpose of shortening travel distances, avoiding these road types may increase distance and travel time. • Save – Touch the Save soft-key to save the destination as a Favorite. Touch the Yes soft-key to confirm your destination and to start your route guidance.
154 Uconnect姞 8.4A View Map • Menu Touch this soft-key to return to the Nav Main Menu. • Zoom In +/ Zoom Out – Touch the Zoom In (+) or Zoom Out (–) soft-keys to change the zoom level. Roads with lower functional classification are not shown in higher zoom levels. (E.g. residential streets, lightly-traveled county roads.) • Time of Arrival/Time to Destination/Distance (only during route guidance) Touch the soft-key in the upper right area of the screen to the display items available.
Uconnect姞 8.4A 155 • Turn List (only during route guidance) – Repeat Touch this soft-key to repeat the current voice prompt. Touch the area in the upper center part of the screen that displays your next turn to see a Turn List for your current – Turn List Touch this soft-key to view the turn list for the current route. route. Touch a turn in the displayed Turn List for the following – Stop Guidance options: Touch this soft-key to stop route guidance.
156 Uconnect姞 8.4A NOTE: You can touch the back arrow soft-key to return With the Map displayed, touch the Options soft-key and to the previous screen or the X soft-key to exit. then touch the Settings soft-key. You can also access this menu by touching the Settings soft-key in the lower right View Map – Settings of the Nav Main Menu. The following Map Settings are available. • Map Setup Touch this soft-key to display items to customize how your map is viewed. Settings – Map Setup for more information.
Uconnect姞 8.4A 157 • Guidance Options • GPS Touch this soft-key to display items to customize your Touch this soft-key to change the GPS display. Touch the route guidance. Settings – Guidance Options for more desired soft-key. information. – Decimal – DMS • Units – DM Touch this soft-key to change the units display. Touch the desired soft-key. – U.S.
158 Uconnect姞 8.4A Settings – Map Setup The following Map Setup options are available. • Map View Touch this soft-key to change how the Map View is displayed. Touch the desired soft-key. – 3D – 2D • Orientation Touch this soft-key to change how the Map Orientation is displayed. Touch the desired soft-key. – North Up – Heading Up With the Map displayed, touch the Options soft-key, then • Current Street touch the Settings soft-key and then the Map Setup softkey.
Uconnect姞 8.4A 159 • Destination Information • Vehicle Icon Touch this soft-key to change the Destination Information that is displayed in the upper right corner of the Map View. Touch the desired soft-key. – Time of Arrival – Time to Destination – Distance Touch this soft-key to change the vehicle icon that is displayed while in Map View. Touch Previous or Next to view the available icons. Touch the back icon soft-key when you’ve made you selection.
160 Uconnect姞 8.4A • TMC Incidents • 3D Landmarks Touch this soft-key to show Traffic Message Channel Touch this soft-key to display 3D landmarks while in (TMC) Incidents while in Map View. Touch and release Map View. Touch and release the soft-key until a checkthe soft-key until a check-mark appears, showing the mark appears, showing the setting has been selected. setting has been selected.
Uconnect姞 8.4A 161 • City Areas The following Guidance options are available. Touch this soft-key to display City Areas while in Map • Play Voice Guidance Prompts View. Touch and release the soft-key until a check-mark Touch this soft-key to enable Voice Guidance Prompts appears, showing the setting has been selected. during route guidance. Touch and release the soft-key until a check-mark appears, showing the setting has been • River Names selected.
162 Uconnect姞 8.4A • Junction View • TMC Avoidance Types Touch this soft-key to enable Junction View during route Touch this soft-key to display the available Traffic Mesguidance. Touch and release the soft-key until a check- sage Channel (TMC) Avoidance Types you would like displayed while in route guidance. Touch and release the mark appears, showing the setting has been selected.
Uconnect姞 8.4A 163 Information From the Nav Main Menu, touch the Information softkey and select one of the following options to view additional information. • Traffic • Where Am I? • Trip Computer NOTE: You can touch the back arrow soft-key to return to the previous screen or the X soft-key to exit.
164 Uconnect姞 8.4A Information – Where Am I? Where Am I? displays the address and GEO Coordinates of your current location. • Touch the GPS soft-key to view the GPS information. • Touch the Save soft-key to save the location in your Favorites. NOTE: You can touch the back arrow soft-key to return to the previous screen or the X soft-key to exit. To select Where Am I? information, touch the Information soft-key from the Nav Main Menu and then touch the Where Am I? soft-key.
Uconnect姞 8.4A 165 Information – Trip Computer Trip Computer displays the following trip information from your last trip • Travel Direction • Distance to final Destination • Vehicle Speed • Distance Traveled • Overall average speed • Moving average speed • Maximum speed reached • Total time traveled To select Trip Computer information, touch the Informa- • Travel time spent moving tion soft-key from the Nav Main Menu and then touch • Travel time spent stopped the Trip Computer soft-key.
166 Uconnect姞 8.4A Emergency • Police – Search and route to a Police Station close to your current location • Fire Department – Search and route a Fire Department close to your current location Touch the Location soft-key to display your exact current location. Touch the Save soft-key to save your current location in Favorites. NOTE: You can touch the back arrow soft-key to return to the previous screen or the X soft-key to exit.
Uconnect姞 8.4A 167 Emergency – Hospital • Name • Distance • ABC (Search) NOTE: In case of emergency, please contact the facility to verify their availability before proceeding. Touch the desired Hospital and touch Yes to confirm the destination.
168 Uconnect姞 8.4A Emergency – Police • Name • Distance • ABC (Search) NOTE: In case of emergency, please contact the facility to verify their availability before proceeding. Touch the desired Police Station and touch Yes to confirm the destination.
Uconnect姞 8.4A 169 Emergency – Fire Department • Name • Distance • ABC (Search) NOTE: In case of emergency, please contact the facility to verify their availability before proceeding. Touch the desired Fire Department and touch Yes to confirm the destination.
170 Uconnect姞 8.
Uconnect姞 8.4A 171 9–1–1 Call Operating Instructions 1. Press the 9-1-1 Call button on the Rearview Mirror; NOTE: In case the 9-1-1 Call button is pushed in error, there will be a 10 second delay before the 9-1-1 Call system initiates a call to a 9-1-1 operator. To cancel the 9-1-1 Call connection, press the 9-1-1 Call button on the Rearview Mirror or press the cancellation button on the Phone Screen. Termination of the 9-1-1 Call will turn the green LED light on the Rearview Mirror off. 4.
172 Uconnect姞 8.4A 6. If a connection between the vehicle and a 9-1-1 operator is made, the 9-1-1 Call system may transmit certain vehicle information to a 9-1-1 operator, including the last known GPS coordinates of your vehicle. If a connection is made between a 9-1-1 operator and your vehicle, you understand and agree that 9-1-1 operators may record conversations and sounds in your car upon connection and consent to such recordings.
Uconnect姞 8.4A 173 9-1-1 Call System Limitations Vehicles sold in Canada and Mexico DO NOT have 9-1-1 Call system capabilities. 9-1-1 or other emergency line operators in Canada and Mexico may not answer or respond to 9-1-1 system calls.
174 Uconnect姞 8.4A Even if the 9-1-1 Call system is fully functional, factors • Equipment malfunction at the 9-1-1 operator facility; beyond Chrysler Group LLC’s control may prevent or • Operator error by the 9-1-1 operator; stop 9-1-1 Call system operation.
Uconnect姞 8.4A 175 WARNING! Failure to perform scheduled maintenance and regularly inspect your vehicle may result in vehicle damage and/or serious injury. General Information This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
176 Uconnect姞 8.4A Remote Service Features If your vehicle is equipped with Remote Service Features, for more information, refer to www.MoparOwnerConnect.com or call 855-792-4241.
Uconnect姞 8.4AN CONTENTS 䡵 Uconnect威 8.4AN System . . . . . . . . . . . . . . . . .179 䡵 Media Mode . . . . . . . . . . . . . . . . . . . . . . . . . .194 䡵 Radio Mode . . . . . . . . . . . . . . . . . . . . . . . . . . .181 ▫ Disc Mode . . . . . . . . . . . . . . . . . . . . . . . . . . .70 ▫ Setting Presets . . . . . . . . . . . . . . . . . . . . . . . .183 ▫ USB/iPod威 Mode . . . . . . . . . . . . . . . . . . . . .195 ▫ SiriusXM™ Satellite Radio Mode. . . . . . . . . . .184 ▫ AUX Mode . . . . . . . .
178 Uconnect姞 8.4AN ▫ Phone Call Features . . . . . . . . . . . . . . . . . . . .212 ▫ Where To?. . . . . . . . . . . . . . . . . . . . . . . . . . .243 ▫ Advanced Phone Connectivity . . . . . . . . . . . .217 ▫ View Map . . . . . . . . . . . . . . . . . . . . . . . . . . .272 ▫ Things You Should Know About Your Uconnect威 Phone. . . . . . . . . . . . . . . . . . . . . .217 ▫ View Map – Settings . . . . . . . . . . . . . . . . . . .274 ▫ General Information . . . . . . . . . . . . . . . . . . .
Uconnect姞 8.4AN 179 Uconnect姞 8.4AN System 2. Media Touch the Media soft-key to access media sources such as: Disc, USB Device and AUX as long as the requested media is present. 3. Climate Refer to Climate Controls in your vehicles Owner’s Manual for further details. 4. Nav Touch the Nav soft-key to access the Navigation feature. Refer to the Navigation section in this manual for further details. 1. Radio 5. Phone Touch the Radio soft-key to enter the Radio Mode.
180 Uconnect姞 8.4AN 6. Apps 9. BACK Touch the Apps soft-key to access Smartphone and Press the BACK button to return to a previous menu or Connected vehicle options. screen. 7. Settings 10. SCREEN OFF Touch the Settings soft-key to display the list of available Press the SCREEN OFF hard-key to turn the touch-screen settings. Refer to Understanding Your Instrument Panel OFF. To turn the screen back ON, just touch the screen. section in your vehicles Owner’s Manual for further 11. VOLUME & MUTE details.
Uconnect姞 8.4AN 181 Radio Mode The radio is equipped with the following modes: • FM • AM • SiriusXM™ Satellite Radio (if equipped) The electronic volume control turns continuously (360 degrees) in either direction, without stopping. Turning the Volume control knob clockwise increases the volume, and counter-clockwise decreases it. When the audio system is turned on, the sound will be set at the same volume level as last played.
182 Uconnect姞 8.4AN Screen Close Fast Seek Up The Red X Soft key at the top right, provides a means to Touch and hold the Seek Up soft-key to advance the radio close the Direct Tune Screen. The Direct Tune Screen also through the available stations or channels at a faster rate, the radio stops at the next available station or channel auto closes if no activity occurs within 10 seconds. when the soft-key is released.
Uconnect姞 8.4AN 183 Direct Tune The selected Station or Channel number is displayed in the Direct Tune text box. Press the Tune soft-key located at the bottom of the radio screen. The Direct Tune soft-key screen is available in Setting Presets AM, FM, and SXM radio modes and can be used to direct The Presets are available for all Radio Modes, and are tune the radio to a desired station or channel.
184 Uconnect姞 8.4AN Browse in AM/FM Deleting Presets When in either AM or FM, the Browse Screen provides a A Preset can be deleted in the Presets Browse screen by means to edit the Presets List and is entered by touching touching the Trash Can Icon for the corresponding Preset. the browse soft key. Return to Main Radio Screen Scrolling Preset List You can return to the Main Radio Screen, by touching the Once in the Browse Presets screen, you can scroll the X soft key when in the Browse Presets screen.
Uconnect姞 8.4AN 185 SiriusXM™ and all related marks and logos are trademarks of SiriusXM™ Radio Inc. and its subsidiaries. SiriusXM™ Radio requires a subscription, sold separately after trial subscription included with vehicle purchase. Prices and programming are provided by SiriusXM™ and are subject to change. Subscriptions governed by Terms & Conditions available at sirius.com/ serviceterms. SiriusXM™ Radio U.S.
186 Uconnect姞 8.4AN • The Genre is displayed below the Presets Bar. Replay • The SiriusXM™ Channel Number is displayed in the The replay function provides a means to store and replay up to 22 minutes of music audio and 48 minutes of talk center. radio. Once the channel is switched, content in replay • The Program Information is displayed at the bottom of memory is lost the Channel Number. Touch the replay soft-key.
Uconnect姞 8.4AN 187 Rewind Favorites Touch the RW soft-key to rewind the content in steps of 5 seconds. Touching the RW soft-key for more than 2 seconds rewinds the content. The Radio begins playing the content at the point at which the touch is released. Touch the fav. soft-key to activate the favorites menu, which will time out in 5 seconds in absence of user interaction. Forward Each touch of the FW soft-key forwards the content in steps of 5 seconds.
188 Uconnect姞 8.4AN Fav. Song While the song is playing to set a Favorite Song, This Screen contains many sub menus. You can exit a sub menu to get back to a parent menu by a touch of the Back touch the fav. soft-key and then the Fav Song soft-key. Arrow. Traffic & Weather All Touch the Traffic & Weather soft-key to tune to a SiriusXM™ Traffic and Weather channel. To set a Traffic Touch the All soft-key at the left of the Browse Screen.
Uconnect姞 8.4AN 189 Presets Favorites Touch the Presets soft-key located at the left of the Touch the Favorites soft-key, located at the left of the Browse screen. Browse screen. You can scroll the Presets list touching the up and down arrows, located at the right side of the screen. Scrolling can also be done by operating the Tune/Scroll Knob as well.
190 Uconnect姞 8.4AN Alert Settings Select Teams Touch the Alert Setting tab at the top of the screen. The Alert Settings menu allows you to choose from a Visual alert or Audible and Visual alert when one of your favorites is airing on any of the SiriusXM™ channels. Touch the Select Teams soft-key to activate the League Scroll list. Touch the chosen league and a scroll list of all teams within the league will appear, then you can select a team by touching the corresponding box.
Uconnect姞 8.4AN 191 Alert Settings Balance/Fade Touch the Alert Setting tab at the top of the screen. The Alert Settings menu allows you to choose from “Alert me to on-air games upon start” or “Alert upon score update” or both when one or more of your selections is airing on any of the SiriusXM™ channels. Audio Touch of the Audio soft-key to activate the Audio settings screen to adjust Balance\Fade, Equalizer, And Speed Adjusted Volume.
192 Uconnect姞 8.4AN Equalizer Speed Adjusted Volume Touch the Equalizer soft-key to activate the Equalizer Touch the Speed Adjusted Volume soft-key to activate the Speed Adjusted Volume screen. screen. Touch the + or - soft-keys, or by touching and dragging over the level bar for each of the equalizer bands. The level value, which spans between ±9, is displayed at the bottom of each of the Bands.
Uconnect姞 8.4AN 193 The Speed Adjusted Volume is adjusted by touching of the + and - buttons or by touching, and dragging over the Level Bar This alters the automatic adjustment of the audio volume with variation to vehicle speed. Volume increases automatically as speed increase to compensate for normal road noise. Surround System (If Equipped) Touch the On soft-key to activate Surround Sound. Touch Off to deactivate this feature.
194 Uconnect姞 8.4AN Browse Touch the browse soft-key to display the browse window. Disc Mode The left side of the browse window displays a list of ways Overview you can browse through the contents of the Disc. If Disc Mode is entered by either inserting a Disc or touch supported by the device, you can browse by Folders, the Disc soft-key on the left side of the display. Once in Artists, Playlists, Albums, Songs, etc. Touch the desired Media Mode, touch the source soft-key and select Disc.
Uconnect姞 8.4AN 195 Repeat Touch the repeat soft-key to toggle the repeat functionality. The Repeat soft-key is highlighted when active. The Radio will continue to play the current track, repeatedly, as long as the repeat is active. USB/iPod姞 Mode Overview USB/iPod威 Mode is entered by either inserting a USB device or iPod威 and cable into the USB Port or touch the iPod威 soft-key on the left side of the display. Once in Media Mode, touch the source soft-key and select iPod威.
196 Uconnect姞 8.4AN Browse Repeat Touch the browse soft-key to display the browse window. The left side of the browse window displays a list of ways you can browse through the contents of the USB device/ iPod威. If supported by the device, you can browse by Folders, Artists, Playlists, Albums, Songs, etc. Touch the desired soft-key on the left side of the screen. The center of the browse window shows items and it’s subfunctions, which can be scrolled by touching the Up and Down soft-keys to the right.
Uconnect姞 8.4AN 197 touch the AUX soft-key on the left side of the display. Once in Media Mode, touch the source soft-key and select Touch the trks soft-key to display a pop up with the Song AUX. List. The currently playing song is indicated by an arrow and lines above and below the song title. When in the Inserting Auxiliary Device Tracks List screen you can rotate the TUNE/SCROLL Gently insert the Auxiliary device cable into the AUX knob to highlight a track (indicated by the line above and Port.
198 Uconnect姞 8.4AN there will be insufficient audio signal for the radio unit to Seek Up/Down play the music on the device. Touch and release the right arrow soft-key for the next selection on the SD Card. Touch and release the left arrow Source soft-key to return to the beginning of the current selecTouch the Source soft-key to select the desired audio tion, or return to the beginning of the previous selection source, Disc, USB/iPod威, SD Card, AUX or Bluetooth威.
Uconnect姞 8.4AN 199 Source Info Touch the Source soft-key to select the desired audio source, Disc, USB/iPod威, SD Card, AUX or Bluetooth威. This screen will time out after a few seconds and return to the main radio screen if no selection is made. Touch the Info soft-key to display the current track information. Touch the Info soft-key a second time to cancel this feature. Repeat Touch the trks soft-key to display a pop up with the Song List.
200 Uconnect姞 8.4AN Bluetooth姞 Mode Overview current selection, or return to the beginning of the previous selection if the Bluetooth威 device is within the first second of the current selection. Bluetooth威 Streaming Audio (BTSA) or Bluetooth威 Mode is entered by pairing a Bluetooth威 device, containing Source music, to the Uconnect威 Access system. Touch the Source soft-key to select the desired audio source, Disc, USB/iPod威, SD Card, AUX or Bluetooth威 .
Uconnect姞 8.4AN 201 Uconnect姞 Phone Uconnect姞 Phone Overview Uconnect威 Phone is a voice-activated, hands-free, invehicle communications system. Uconnect威 Phone allows you to dial a phone number with your mobile phone. Uconnect威 Phone supports the following features: Voice Activated Features: • Calling Back the last incoming call number (“Call Back”). • View Call logs on screen (“Show incoming calls”, “Show Outgoing calls”, “Show missed Calls”, “Show Recent Calls”).
202 Uconnect姞 8.4AN • Sending a text message via the touch-screen. • Listen to Music on your Bluetootht Device via the touch-screen. • Pairing up to 10 phones/audio devices for easy access to connect to them quickly. NOTE: Your phone must be capable of SMS messaging via Bluetooth威 for messaging features to work properly. vehicle and enables you to mute the system’s microphone for private conversation.
Uconnect姞 8.4AN 203 system. Only one linked (or paired) mobile phone and your vehicle is equipped. Please see the Uconnect威 Voice one audio device can be used with the system at a time. Command section for direction on how to use the button. The system is available in English, Spanish, or French languages. The Uconnect威 Phone is fully integrated with the vehicle’s audio system.
204 Uconnect姞 8.4AN You will be prompted for a specific command and then guided through the available options. “John Smith”. Please remember, the Uconnect威 Phone works best when you talk in a normal conversational tone, as if speaking to someone sitting a few feet/ meters away from you. • Prior to giving a voice command, one must wait for the beep, which follows the “Listen” prompt or another prompt. Natural Speech • For certain operations, compound commands can be used.
Uconnect姞 8.4AN 205 do you want to call?” in the case where a phone call was requested but the specific name was not recognized. The system utilizes continuous dialog; when the system requires more information from the user it will ask a question to which the user can respond without pressing button. the Voice Command Voice Command Tree Refer to “Voice Tree” in this section. Help Command Cancel Command At any prompt, after the beep, you can say “Cancel” and you will be returned to the main menu.
206 Uconnect姞 8.4AN NOTE: • You must have Bluetooth威 enabled on your phone to complete this procedure. • The vehicle must be in PARK. 1. Press the “Phone” soft-key on the screen to begin. • Search for available devices on your Bluetooth威 enabled mobile phone. When prompted on the phone, enter the name and PIN shown on the Uconnect威 screen, • See Step 4 to complete the process. 4. Uconnect威 Phone will display an in progress screen while the system is connecting. 2.
Uconnect姞 8.4AN 207 • Search for available devices on your Bluetooth威 enabled mobile phone.
208 Uconnect姞 8.4AN You can also use the following VR commands to bring up NOTE: If there is no device currently connected with the system, a pop-up will appear. the Paired Phone screen from any screen on the radio: • “Show Paired Phones” or • “Connect My Phone” Pair A Bluetooth威 Streaming Audio Device • Touch the “Player” or “Media” soft-key to begin, • Search for available devices on your Bluetooth威 enabled audio device.
Uconnect姞 8.4AN 209 You can also use the following VR command to bring up Disconnecting A Phone or Audio Device a list of paired audio devices.
210 Uconnect姞 8.4AN • The options pop-up will be displayed, • Touch the “Delete Device” soft-key, • Touch the X to exit out of the Settings screen. Making A Phone Or Audio Device A Favorite • Touch the “Settings” soft-key, • Touch the “Phone/Bluetooth威” soft-key, Phonebook Download — Automatic Phonebook Transfer From Mobile Phone If equipped and specifically supported by your phone, Uconnect威 Phone automatically downloads names (text names) and number entries from the mobile phone’s phonebook.
Uconnect姞 8.4AN 211 • A maximum of 1000 entries per phone will be down- Managing Your Favorite Phonebook loaded and updated every time a phone is connected There are three ways you can add an entry to your to the Uconnect威 Phone. Favorite Phonebook. • Depending on the maximum number of entries down- 1. During an active call of a number to make a favorite, loaded, there may be a short delay before the latest touch and hold a favorite button on the top of the downloaded names can be used.
212 Uconnect姞 8.4AN 3. From the Phone main screen, select phonebook. From the phonebook screen, select the “Favorites” soft-key and then select the + soft-key located to the right of the phonebook record. Select an empty entry and touch the + on that selected entry. When the Options pop-up appears, touch “Add from Mobile”. You will then be asked which contact and number to choose from your mobile phonebook. When complete the new favorite will be shown.
Uconnect姞 8.4AN 213 • Favorite Phonebook Call By Saying A Phonebook Name • Mobile Phonebook • Press the • Recent Call Log • After the “Listening” prompt and the following beep, say “Call John Doe Mobile”, • SMS Message Viewer NOTE: All of the above operations except Redial can be done with 1 call or less active.
214 Uconnect姞 8.4AN • Mute/unmute Recent Calls • Transfer the call to/from the phone You may browse up to 34 of the most recent of each of the following call types: • Swap 2 active calls • Join 2 active calls together Touch-Tone Number Entry • Touch the “Phone” soft-key, • Touch the “Dial” soft-key, • The Touch-Tone screen will be displayed, • Incoming Calls • Outgoing Calls • Missed Calls • All Calls These can be accessed by touching the “recent calls” soft-key on the Phone main screen.
Uconnect姞 8.4AN 215 NOTE: Incoming can also be replaced with “Outgoing”, mobile phone. Press the phone button, answer soft“Recent” or “Missed”. key or caller ID box to place the current call on hold and answer the incoming call.
216 Uconnect姞 8.4AN the phonebooks. To go back to the first call, refer to Call Termination “Toggling Between Calls” in this section. To combine two To end a call in progress, momentarily press the butcalls, refer to “Join Calls” in this section. ton or the end soft-key. Only the active call(s) will be terminated and if there is a call on hold, it will become Place/Retrieve A Call From Hold the new active call.
Uconnect姞 8.4AN 217 Call Continuation Connect Or Disconnect Link Between The Call continuation is the progression of a phone call on the Uconnect威 Phone And Mobile Phone Uconnect威 Phone after the vehicle ignition key has been If you would like to connect or disconnect the Bluetooth威 connection between a Uconnect威 Phone paired mobile switched to OFF. phone and the Uconnect威 Phone, follow the instructions NOTE: The call will remain within the vehicle audio described in your mobile phone User’s Manual.
218 Uconnect姞 8.4AN • Make sure that no one other than you is speaking • It is recommended that you do not store names in your during a voice command period. favorites phonebook while the vehicle is in motion. • Performance is maximized under: • low-to-medium blower setting, • low-to-medium vehicle speed, • low road noise, • smooth road surface, • fully closed windows, • dry weather condition. • Phonebook (Mobile and Favorites) name recognition rate is optimized when the entries are not similar.
Uconnect姞 8.4AN 219 • fully closed windows, • dry weather conditions, and • operation from the driver’s seat. Texting messaging over Bluetooth威 the “Messaging” button will be greyed out and the feature will not be available for use. • Performance, such as audio clarity, echo, and loudness NOTE: Uconnect威 Phone Voice Texting is only available to a large degree rely on the phone and network, and when the vehicle is not in moving. not the Uconnect威 Phone.
220 Uconnect姞 8.4AN • After the system prompts you for what message you want to send, say the message you wish to send or say You can send messages using Uconnect威 Phone. To send “List”. There are 18 preset messages. a new message: While the list of defined messages are being read, you can • Touch the “Phone” soft-key, interrupt the system by pressing the button and • Touch the “messaging” soft-key then “New Message”, saying the message you want to send.
Uconnect姞 8.4AN 221 7. I’m on my way. Bluetooth威 Communication Link 8. Thanks. Mobile phones have been found to lose connection to the Uconnect威 Phone. When this happens, the connection can generally be reestablished by switching the phone OFF/ON. Your mobile phone is recommended to remain in Bluetooth威 ON mode. 9. I’ll be late. 10. I will be minutes late. 11. See you in minutes. 12. Stuck in traffic. 13. Start without me. 14. Where are you? 15. Are you there yet? 16.
222 Uconnect姞 8.
Uconnect姞 8.4AN 223 • Send dial tones for automated systems is available NOTE: while a call is active. This is an example that uses a • You can replace “John Smith” with any name in your Phonebook Record named “Voicemail Password.” mobile or favorite phone book. You can also say “Send a message to John Smith” and the system will ask you • Storing Dial tones in contact names is possible but only the first number encountered in a contact name will be which phone number you want to send a message to sent.
224 Uconnect姞 8.
Uconnect姞 8.4AN 225 NOTE: • You can replace “248 555 1212” with any phone number supported by your Mobile phone. • You can replace “John Smith” with any name in your mobile or favorite phone book. You can also say “Send • You can replace “4” with any message number shown a message to John Smith” and the system will ask you on the screen. which phone number you want to send a message to • If your phone does not support phonebook download for John Smith.
226 Uconnect姞 8.
Uconnect姞 8.4AN 227 NOTE: Available Voice Commands are shown in bold General Information face and underlined in the gray shaded boxes. This device complies with Part 15 of the FCC rules and RSS 210 of Industry Canada. Operation is subject to the following conditions: • Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. • This device may not cause harmful interference.
228 Uconnect姞 8.4AN Uconnect姞 Voice Command Voice Command Overview The Uconnect威 Voice Command system allows you to control your AM, FM radio, satellite radio, disc player, SD Card, USB/iPod and Sirius Travel Link. WARNING! ALWAYS drive safely with your hands on the wheel. You have full responsibility and assume all risks related to the use of the Uconnect威 features and applications in this vehicle. Only use Uconnect威 when it is safe to do so.
Uconnect姞 8.4AN 229 If a command is not spoken a second time, the system will respond with an error and give some direction as what can be said based on the context you are in. After three consecutive failures of a spoken command the VR session with end. The system will best recognize your speech if the windows are closed, and the heater/air conditioning fan is set to low. button Pressing the Uconnect威 Voice Command while the system is speaking is known as “barging in.
230 Uconnect姞 8.4AN Smith”. For multiple inputs in the same phrase or sen- Changing the Volume tence, the system identifies the topic or context and 1. Start a dialogue by pressing the Voice Command provides the associated follow-up prompt such as “Who button. do you want to call?” in the case where a phone call was 2. Say a command (e.g., “Help”). requested but the specific name was not recognized. The system utilizes continuous dialog; when the system 3.
Uconnect姞 8.4AN 231 Disc To switch to the disc mode, say “Change source to Disc”.
232 Uconnect姞 8.
Uconnect姞 8.4AN 233 NOTE: 1. You can replace “950 AM” with any other AM or FM frequency, such as “98.7 FM”. 2. You can replace “80’s on 8” with any other satellite station name received by the radio. 3. You can replace “8” with any other satellite station named received by the radio. 4. You can replace “rock” with any of the satellite music types. NOTE: Available Voice Commands are shown in bold face and shaded grey.
234 Uconnect姞 8.
Uconnect姞 8.4AN 235 NOTE: 1. You can replace the album, artist, song, genre, playlist, podcast and audio book names with any corresponding names on the current device that is playing. 2. You can replace “8” with any track on the CD that is currently playing. Command is only available when CD is playing. 3. Playlist, Podcast and audio book commands are only available when the iPod is connected and playing. 4.
236 Uconnect姞 8.
Uconnect姞 8.4AN 237 NOTE: 1. You can replace “NFL” with any league shown on the sports league screen. For example you can say “Show MLB headlines” or “Show PGA headlines”. 2. You can replace “Headlines” with any menu items shown on a league screen. For example you can say “Show NFL Schedule and results” or “Show NCAA Basketball AP top 25” or “Show Major League Baseball Teams”. 3.
238 Uconnect姞 8.
Uconnect姞 8.4AN 239 NOTE: 1. Only available with Navigation equipped vehicles. 2. You can replace “Player” with “Radio”, “Navigation”, “Phone”, “Climate”, “More” or “Settings”. 3. Navigation commands only work if equipped with Navigation. NOTE: Available Voice Commands are shown in bold face and shaded grey.
240 Uconnect姞 8.
Uconnect姞 8.4AN 241 NOTE: 1. You can also say “Find City”, “Find Favorite”, “Find Play by Category”, “Find Play by Name”, “Find Recently Found”, “Where to?” or “Go Home”. 2. You can say “Find Nearest” then “Restaurant”, “Fuel”, “Transit”, “Lodging”, “Shopping”, “Bank”, “Entertainment”, “Recreation”, “Attractions”, “Community”, “Auto Services”, “Hospitals”, “Parking”, “Airport”, “Police Stations”, “Fire Stations”, or “Auto Dealers”. NOTE: Available Voice Commands are shown in bold face and shaded grey.
242 Uconnect姞 8.4AN Navigation Main Menu Getting Started To access the Navigation system, touch the Nav soft-key on bottom of the screen. • Touch Where To? to find or route to a destination. • Touch View Map to view the map.
Uconnect姞 8.4AN 243 • Touch Information to view Traffic, Where Am I? and Where To? Trip Computer information • Touch Emergency to search for Hospitals, Police and Fire Stations near your current location. You can also display your current location and save any Emergency facility location to your Favorites. • Touch Stop to stop a route. • Touch Detour to detour a route. From the Nav Main Menu, touch the Where To? soft-key and select one of the following methods to program a route guidance.
244 Uconnect姞 8.4AN • Address • Intersection Touch this soft-key to search by a street address or a street Touch this soft-key to enter in two street names as a name with house number. destination. • Recent • Go Home Touch this soft-key to access previously routed addresses Touch this soft-key to program or confirm a route to the or locations. saved home address. • Point of Interest • GEO Coordinates Touch this soft-key when you want to route to a point of interest.
Uconnect姞 8.4AN 245 • City Center Where To? – Address Touch this soft-key to route to a particular city. The To enter a destination by Address, follow these steps: navigation system will calculate a route with the destination at the center of the city. • Closest City Touch this soft-key to route to a nearby city. The navigation system will calculate a route with the destination at the center of the nearby city.
246 Uconnect姞 8.4AN NOTE: To change the state and/or country, touch the 2. Touch Spell City or Spell Street to begin entering the state, country soft-key and follow the prompts to change address of your destination. the state and/or country. If you touch Spell City, you will have to enter and select/touch the desired city name, followed by the desired street name and lastly the house number.
Uconnect姞 8.4AN 247 If you touch Spell Street, you will have to enter and select/touch the desired street name in the correct city and then you will have to enter the house number 3. Once the correct City, Street and Number has been entered, you will be asked to confirm your destination by touching OK. 4. Touch the Yes soft-key to confirm your destination and begin your route.
248 Uconnect姞 8.4AN You can touch the back arrow soft-key to return to the previous screen or the X soft-key to exit. Where To? – Recent Touch the soft-key with the name of the desired destination. Confirm the route with Yes to start the route guidance. To route to a recent destination, touch the Recent soft-key To delete a destination from the list, touch the trash can icon soft-key. in the NAV Main Menu.
Uconnect姞 8.4AN 249 The following Options are available for each destination: • Edit Name • Add Phone Number • Move Up in the list • Move Down in the list • Place Pin on the location (saves the spot on the list) NOTE: You can touch the back arrow soft-key to return to the previous screen or the X soft-key to exit. To display the options for a destination touch the Options soft-key that looks like a gear.
250 Uconnect姞 8.4AN Where To? – Point of Interest To enter a destination by Point of Interest (POI) touch the Point of Interest soft-key in the Nav Main Menu. You have the following POIs to choose from: • Gas Stations • Restaurants The Point of Interest database allows you to select a destination from a list of locations and public places, or • Hotels/Motels points of interest (POI)s.
Uconnect姞 8.4AN 251 • All POIs • Around Me • Spell POI Name • In a City You can also change your POI search area, by touching • Near Destination (only available during route guidance) the Change Search Area soft-key. You will have the • Along Route (only available during route guidance) following options to change your search area: NOTE: You can touch the back arrow soft-key to return to the previous screen or the X soft-key to exit.
252 Uconnect姞 8.4AN POI – Gas Stations • Name To select a Gas Station POI, touch Point of Interest from • Distance the Nav Main Menu, then touch the Point of Interest • Type soft-key and then touch the Gas Stations soft-key. • ABC (Search) Touch the desired Gas Station and touch Yes to confirm the destination.
Uconnect姞 8.4AN 253 POI – Restaurants • Add as first destination To select a Restaurant POI, touch Point of Interest from • Add as last destination the Nav Main Menu, then touch the Point of Interest You can touch the back arrow soft-key to return to the soft-key and then touch the Restaurants soft-key. previous screen or the X soft-key to exit. You can search for a restaurants by the following categoPOI – Hotels/Motels ries, which are soft-key tabs at the top of the screen.
254 Uconnect姞 8.4AN Touch the desired hotel or motel and touch Yes to confirm You can search for an ATM or Bank by the following the destination. categories, which are soft-key tabs at the top of the screen.
Uconnect姞 8.4AN 255 You can touch the back arrow soft-key to return to the You can search through the available POI categories to previous screen or the X soft-key to exit. find your desired POI.
256 Uconnect姞 8.4AN • Other • Parking • Recreation • Restaurants • Shopping • Travel • Truck Select a category and then select a subcategory if necessary. Touch the ABC soft-key to activate a keyboard with Alphabetic characters in order to search within the POI categories.
Uconnect姞 8.4AN 257 Touch the desired POI and touch Yes to confirm the destination. NOTE: If you are currently on a route guidance and you select a POI, the system will ask you to choose one of the following: • Cancel previous route • Add as first destination • Add as last destination You can touch the back arrow soft-key to return to the previous screen or the X soft-key to exit.
258 Uconnect姞 8.4AN To save a favorite destination, touch the Add Favorite Where To? – Intersection soft-key and follow the steps to route a destination. To enter a destination by Intersection, follow these steps: To display the options for a favorite destination touch the Options soft-key that looks like a gear.
Uconnect姞 8.4AN 259 This menu shows the default country and state setting. 2. This menu shows the default country and state settings. NOTE: To change the state and/or country, touch the If you touch Spell City, you will have to enter and state, country soft-key and follow the prompts to change select/touch the desired city name, followed by the the state and/or country. desired street name and lastly you will have to enter the intersection street.
260 Uconnect姞 8.4AN If you touch Spell Street, you will have to enter and Where To? – Go Home select/touch the desired street name in the correct city To enter your Home Address, follow these steps: and then you will have to enter the intersecting street. 3. Once the correct City and Intersection has been entered, you will be asked to confirm your destination. 4. Touch the Yes soft-key to confirm your destination and begin your route.
Uconnect姞 8.4AN 261 2. To set your set your Home Address choose one of the 4. Touch the Save soft-key to confirm your destination following options: and begin the route to your Home Address. NOTE: Refer to the individual section of the chosen 5. This address will be saved as your Home Address and option for further information. it can be accessed by touching the Go Home soft-key in the Where To? Menu.
262 Uconnect姞 8.4AN Where To? – Trips Touch the soft-key with the name of the desired Trip and touch the first destination in the list. Confirm the route by touching Yes to start the route guidance. To add a Trip, follow these steps: 1. Touch the Create new Trip soft-key. 2. Type in the new Trip Name. 3. Touch Add Destination to add destinations to your trip. 4. Choose from the following options to add a destination NOTE: Refer to the individual section of the chosen option for further information.
Uconnect姞 8.4AN 263 • Intersection • GEO Coordinates • Point on Map • City Center • Closest Cities • Phone Number 5. Add more needed destinations to your trip. To display the options for a trip touch the Options soft-key that looks like a gear.
264 Uconnect姞 8.4AN Where To? – GEO Coordinate 1. Enter the Latitude by typing in the numbers. Use the left and right arrows to select specific numbers in the To enter a destination by GEO Coordinate, touch Where location shown. To? in the Nav Main Menu and then touch the GEO Coordinate soft-key. 2. Touch the OK soft-key.
Uconnect姞 8.4AN 265 3. Enter the Longitude by typing in the numbers. Use the Where To? – Point on Map left and right arrows to select specific numbers in the location shown. NOTE: Touch the Format soft-key to change the format of the Latitude/Longitude entry. 4. Touch OK to confirm the destination. 5. Touch the Yes soft-key to confirm your destination and begin your route.
266 Uconnect姞 8.4AN 3. Touch the Yes soft-key to confirm your destination and begin your route. NOTE: If you are currently on a route guidance and you select a Point on Map, the system will ask you to choose one of the following: • Cancel previous route • Add as first destination • Add as last destination 1. Use the touch-screen to drag the center of the cross over the desired destination. 2.
Uconnect姞 8.4AN 267 Where To? – City Center 2. Touch the desired city from the list. 3. Touch the Yes soft-key to confirm your destination and begin your route.
268 Uconnect姞 8.4AN Where To? – Closest City 1. Touch the desired city from the list. To enter a destination by Closest City, touch Where To? in 2. Touch the Yes soft-key to confirm your destination and the Nav Main Menu and then touch the Closest City begin your route. soft-key.
Uconnect姞 8.4AN 269 NOTE: If you are currently on a route guidance and you Where To? – Phone select a Closest City, the system will ask you to choose one of the following: • Cancel previous route • Add as first destination • Add as last destination You can touch the back arrow soft-key to return to the previous screen or the X soft-key to exit. To enter a destination by Phone number, touch Where To? in the Nav Main Menu and then touch the Phone Number soft-key. 1.
270 Uconnect姞 8.4AN 2. Touch the desired destination from the list. Before Route Guidance 3. Touch the Yes soft-key to confirm your destination and Before confirming the route with the Yes soft-key, it is possible to select options different from the default route begin your route. settings.
Uconnect姞 8.4AN 271 touch and release the desired setting until a check- NOTE: Since toll roads, tunnels and ferries are built for mark appears. the purpose of shortening travel distances, avoiding these road types may increase distance and travel time. • Save – Touch the Save soft-key to save the destination as a Favorite. Touch the Yes soft-key to confirm your destination and to start your route guidance.
272 Uconnect姞 8.4AN View Map • Menu Touch this soft-key to return to the Nav Main Menu. • Zoom In +/ Zoom Out – Touch the Zoom In (+) or Zoom Out (–) soft-keys to change the zoom level. Roads with lower functional classification are not shown in higher zoom levels. (E.g. residential streets, lightly-traveled county roads.) • Time of Arrival/Time to Destination/Distance (only during route guidance) Touch the soft-key in the upper right area of the screen to the display items available.
Uconnect姞 8.4AN 273 • Turn List (only during route guidance) – Settings Touch this soft-key to view all the available settings. Touch the area in the upper center part of the screen that See View Map – Settings for more information. displays your next turn to see a Turn List for your current – Repeat route. Touch this soft-key to repeat the current voice prompt.
274 Uconnect姞 8.4AN Where Am I? displays the address and GEO Coordinates View Map – Settings of your current location. – Touch the GPS soft-key to view the GPS information. – Touch the Save soft-key to save the location in your Favorites. NOTE: You can touch the back arrow soft-key to return to the previous screen or the X soft-key to exit. With the Map displayed, touch the Options soft-key and then touch the Settings soft-key.
Uconnect姞 8.4AN 275 The following Map Settings are available. • Units • Map Setup Touch this soft-key to change the units display. Touch the Touch this soft-key to display items to customize how desired soft-key. – U.S. (mile/feet) your map is viewed. Settings – Map Setup for more – Imperial (mile/yard) information.
276 Uconnect姞 8.4AN Settings – Map Setup The following Map Setup options are available. • Map View Touch this soft-key to change how the Map View is displayed. Touch the desired soft-key. – 3D – 2D • Orientation Touch this soft-key to change how the Map Orientation is displayed. Touch the desired soft-key. – North Up – Heading Up With the Map displayed, touch the Options soft-key, then • Current Street touch the Settings soft-key and then the Map Setup softkey.
Uconnect姞 8.4AN 277 • Destination Information • Vehicle Icon Touch this soft-key to change the Destination Information that is displayed in the upper right corner of the Map View. Touch the desired soft-key. – Time of Arrival – Time to Destination – Distance Touch this soft-key to change the vehicle icon that is displayed while in Map View. Touch Previous or Next to view the available icons. Touch the back icon soft-key when you’ve made you selection.
278 Uconnect姞 8.4AN • TMC Incidents • 3D Landmarks Touch this soft-key to show Traffic Message Channel Touch this soft-key to display 3D landmarks while in (TMC) Incidents while in Map View. Touch and release Map View. Touch and release the soft-key until a checkthe soft-key until a check-mark appears, showing the mark appears, showing the setting has been selected. setting has been selected.
Uconnect姞 8.4AN 279 • City Areas The following Guidance options are available. Touch this soft-key to display City Areas while in Map • Play Voice Guidance Prompts View. Touch and release the soft-key until a check-mark Touch this soft-key to enable Voice Guidance Prompts appears, showing the setting has been selected. during route guidance. Touch and release the soft-key until a check-mark appears, showing the setting has been • River Names selected.
280 Uconnect姞 8.4AN • Junction View • TMC Avoidance Types Touch this soft-key to enable Junction View during route Touch this soft-key to display the available Traffic Mesguidance. Touch and release the soft-key until a check- sage Channel (TMC) Avoidance Types you would like displayed while in route guidance. Touch and release the mark appears, showing the setting has been selected.
Uconnect姞 8.4AN 281 Information From the Nav Main Menu, touch the Information softkey and select one of the following options to view additional information. • Traffic • Where Am I? • Trip Computer NOTE: You can touch the back arrow soft-key to return to the previous screen or the X soft-key to exit.
282 Uconnect姞 8.4AN Information – Where Am I? Where Am I? displays the address and GEO Coordinates of your current location. • Touch the GPS soft-key to view the GPS information. • Touch the Save soft-key to save the location in your Favorites. NOTE: You can touch the back arrow soft-key to return to the previous screen or the X soft-key to exit. To select Where Am I? information, touch the Information soft-key from the Nav Main Menu and then touch the Where Am I? soft-key.
Uconnect姞 8.4AN 283 Information – Trip Computer Trip Computer displays the following trip information from your last trip • Travel Direction • Distance to final Destination • Vehicle Speed • Distance Traveled • Overall average speed • Moving average speed • Maximum speed reached • Total time traveled To select Trip Computer information, touch the Informa- • Travel time spent moving tion soft-key from the Nav Main Menu and then touch • Travel time spent stopped the Trip Computer soft-key.
284 Uconnect姞 8.4AN Emergency • Hospital – Search and route to a Hospital close to your current location • Police – Search and route to a Police Station close to your current location • Fire Department – Search and route a Fire Department close to your current location Touch the Location soft-key to display your exact current location. Touch the Save soft-key to save your current location in Favorites.
Uconnect姞 8.4AN 285 Emergency – Hospital • Name • Distance • ABC (Search) NOTE: In case of emergency, please contact the facility to verify their availability before proceeding. Touch the desired Hospital and touch Yes to confirm the destination.
286 Uconnect姞 8.4AN Emergency – Police • Name • Distance • ABC (Search) NOTE: In case of emergency, please contact the facility to verify their availability before proceeding. Touch the desired Police Station and touch Yes to confirm the destination.
Uconnect姞 8.4AN 287 Emergency – Fire Department • Name • Distance • ABC (Search) NOTE: In case of emergency, please contact the facility to verify their availability before proceeding. Touch the desired Fire Department and touch Yes to confirm the destination.
288 Uconnect姞 8.
Uconnect姞 8.4AN 289 9–1–1 Call Operating Instructions 1. Press the 9-1-1 Call button on the Rearview Mirror; NOTE: In case the 9-1-1 Call button is pushed in error, there will be a 10 second delay before the 9-1-1 Call system initiates a call to a 9-1-1 operator. To cancel the 9-1-1 Call connection, press the 9-1-1 Call button on the Rearview Mirror or press the cancellation button on the Phone Screen. Termination of the 9-1-1 Call will turn the green LED light on the Rearview Mirror off. 4.
290 Uconnect姞 8.4AN 6. If a connection between the vehicle and a 9-1-1 operator is made, the 9-1-1 Call system may transmit certain vehicle information to a 9-1-1 operator, including the last known GPS coordinates of your vehicle. If a connection is made between a 9-1-1 operator and your vehicle, you understand and agree that 9-1-1 operators may record conversations and sounds in your car upon connection and consent to such recordings.
Uconnect姞 8.4AN 291 9-1-1 Call System Limitations Vehicles sold in Canada and Mexico DO NOT have 9-1-1 Call system capabilities. 9-1-1 or other emergency line operators in Canada and Mexico may not answer or respond to 9-1-1 system calls.
292 Uconnect姞 8.4AN Even if the 9-1-1 Call system is fully functional, factors • Equipment malfunction at the 9-1-1 operator facility; beyond Chrysler Group LLC’s control may prevent or • Operator error by the 9-1-1 operator; stop 9-1-1 Call system operation.
Uconnect姞 8.4AN 293 WARNING! Failure to perform scheduled maintenance and regularly inspect your vehicle may result in vehicle damage and/or serious injury. General Information This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
294 Uconnect姞 8.4AN Remote Service Features If your vehicle is equipped with Remote Service Features, for more information, refer to www.MoparOwnerConnect.com or call 855-792-4241.
13SMT-526-AB Second Edition Uconnect Access Chrysler Group LLC Printed in the USA
