User`s manual

Equalizer
• Touch the Equalizer soft-key to adjust the Bass, Mid
and Treble. Use the + or - soft-key to adjust the
equalizer to your desired settings. Press the back
arrow soft-key when done.
Balance/Fade
• Touch the Balance/Fade soft-key to adjust the sound
from the speakers. Use the arrow soft-key to adjust the
sound level from the front and rear or right and left
side speakers. Touch the Center ⬙C⬙ soft-key to reset
the balance and fade to the factory setting. Press the
back arrow soft-key when done.
Speed Adjustable
• Touch the Speed Adjusted Volume soft-key to select
between OFF, 1, 2 or 3. This will decrease the radio
volume relative to a decrease in vehicle speed. Press
the back arrow soft-key when done.
Loudness
• Touch the Loudness soft-key to select the Loudness
feature. When this feature is activated it improves
sound quality at lower volumes.
Clock Setting
There are two ways to enter the clock setting procedure
on the Uconnect威 5.0 system.
1. Press the More hard-key on the right side of the
display, next press the Time soft-key and then press
the Set soft-key. OR Press the Settings hard-key on the
right side of the display, then press the Clock soft-key.
The Time setting screen is displayed and the clock can
be adjusted as described in the following procedure.
NOTE: In the Clock Setting Menu you can also select
Display Clock. Display Clock turns the clock display in
the status bar on or off.
5
Uconnect姞 5.0 37