User`s manual

Inserting Auxiliary Device
Gently insert the Auxiliary device cable into the AUX
Port. If you insert a Auxiliary device with the ignition
ON, the unit will switch to AUX mode and begin to play
when you insert the device cable.
Controlling the Auxiliary Device
The control of the auxiliary device (e.g., selecting play-
lists, play, fast forward, etc.) cannot be provided by the
radio; use the device controls instead. Adjust the volume
with the VOLUME rotary knob, or with the volume of the
attached device.
NOTE: The vehicle radio unit is acting as the amplifier
for audio output from the Auxiliary device. Therefore if
the volume control on the Auxiliary device is set too low,
there will be insufficient audio signal for the radio unit to
play the music on the device.
Bluetooth威 Mode
Bluetooth威 Streaming Audio (BTSA) or Bluetooth威 Mode
is entered by pairing a Bluetooth威 device, containing
music, to the Uconnect威 Access system.
Before proceeding, the Bluetooth威 device needs to be
paired through Uconnect威 Phone in order to communi-
cate with the Uconnect威 Access System.
NOTE: See the pairing procedure in the in this manual
for further details.
Once the Bluetooth威 device is paired to the Uconnect威
Access System, touch the Media hard-key located on the
left side of the display. Once in Media Mode, touch the
source soft-key and select Bluetooth威.
42 Uconnect姞 5.0