User manual

UDOO Starting manual (beta) Version 0.4
http://www.udoo.org/
5"
● GPU Vivante GC 2000 for 3D + Vivante GC 355 for 2D (vector graphics) +
Vivante GC 320 for 2D (composition)
● Atmel SAM3X8E ARM Cortex-M3 CPU (same as Arduino Due)
● RAM DDR3 1GB
● 76 fully available GPIO with Arduino-compatible R3 1.0 pinout
● HDMI and LVDS + Touch
● 2 Micro USB (1 OTG)
● 2 USB 2.0 type A and 1 USB 2.0 internal pin header (requires adapter cable)
● Analog Audio and Mic jacks
● CSI Camera Connection
● on board Micro SD card reader (boot device)
● Power Supply (6-15V) and External Battery connector
● Ethernet RJ45 (10/100/1000 MBit)
● WiFi Module
● SATA connector with power header
1.3.3. UDOO Dual
● Freescale i.MX6DualLite, 2x ARM
®
Cortex™-A9 core @ 1GHz with ARMv7A
instruction set
● GPU Vivante GC 880 for 3D and 2D (vector graphics) + Vivante GC 320 for 2D
(composition)
● Atmel SAM3X8E ARM Cortex-M3 CPU (same as Arduino Due)
● RAM DDR3 1GB
● 76 fully available GPIO with Arduino-compatible R3 1.0 pinout
● HDMI and LVDS + Touch
● 2 Micro USB (1 OTG)
● 2 USB 2.0 type A and 1 USB 2.0 internal pin header (requires adapter cable)
● Analog Audio and Mic jacks
● CSI Camera Connection
● on board Micro SD card reader (boot device)
● Power Supply (6-15V) and External Battery connector
● Ethernet RJ45 (10/100/1000 MBit)
● WiFi Module
● SATA connector with power header
1.3.4. UDOO Dual Basic
● Freescale i.MX6DualLite, 2x ARM
®
Cortex™-A9 core @ 1GHz with ARMv7A
instruction set
● GPU Vivante GC 880 for 3D and 2D (vector graphics) + Vivante GC 320 for 2D
(composition)
● Atmel SAM3X8E ARM Cortex-M3 CPU (same as Arduino Due)
● RAM DDR3 1GB
● 76 fully available GPIO with Arduino-compatible R3 1.0 pinout
● HDMI and LVDS + Touch