Specifications

DSD 700 OPERATING INSTRUCTIONS 21
6 From the displayed list, choose the service that you wish to
move using or on the RCU.
7 Press to move this service into the service to relocate
box.
8 Press or to highlight the position where you want the
service from the relocation box to be placed.
9 Using , move the service that is now in the relocation box
into the new position in the current order list.
10 Repeat steps 6 to 9 until all services are set as you wish.
11 Press OK to confirm your selections.
The Organising Services menu is displayed.
12 Press EXIT to return to the Main Menu or MENU to return to
the service.
Original TV Channel Setup
To reset the TV services to the order supplied by the Service
Provider, do the following:
1 Press MENU on the RCU.
The Main Menu options list is displayed.
2 On the RCU, press to highlight Channel Arangement
Options.
3 Press OK to display channel arrangement options list.
4 Press to highlight Original TV Channel Setup.
5 Press OK to reset the services list to the list supplied by the
Service Provider.
A message “ Do you want to reset the TV Channel list?”
is displayed.
6 Press OK.
A scanning screen is displayed after which the TV returns to
its original channel.
Delete Music/Radio Channels
Refer to “Delete TV channels” page 18. Select Delete Music/Radio
channels instead of TV channels.
Sort Music/Radio Channels
Refer to “Sort TV Services” page 20. Select Sort Audio Services
instead of TV Services.
Original Music/Radio Channel Setup
Refer to “Original TV channel set-up” this page. Select Original
Music/Radio channel set-up instead of Original TV channel set-up.
Search Service Names
This facility is used when a new service provider becomes
available. It is recommended that this facility is used on a weekly
basis to upgrade the services available to you .
1 Press MENU on the RCU.
The Mains Menu options list is displayed.
2 On the RCU, press to highlight Channel Arrangement
Options.
3 Press OK to display channel arrangement options list.
4 On the RCU, press to highlight Search Service Names.
5 Press OK.
A message “Do you want to start the search” is
displayed.
6 Press OK to confirm.
A scanning screen is displayed in which are listed the
operators, services and transport streams. After a period of
time, the previous service is automatically restored.
NOTE: The personal sort list is lost after a full rescan has
been performed.
Mailbox
The Service Provider can send global or individual messages over
the air. When a message has been received, the yellow front panel
indicator will be illuminated and the symbol displayed on every
menu screen.
To read the message do the following:
1 Press MENU on the RCU.
The Mains Menu options list is displayed.
2 On the RCU, press to highlight Mailbox.
3 Press OK. The Mail Messages screen is displayed.
4 Press OK to return to the Main Menu.
The front panel yellow indicator will be OFF and the mail symbol will
no longer be displayed.
Advanced Options
Selecting the Advanced Options on the Main Menu provides access
to important technical settings for the decoder and satellite dish
antenna.
Change Dish Installation
Important!
The installation settings should be set by a qualified
person.
Do not change any installation settings before carefully
noting the value of the setting you want to change and
ensuring that the new and old values are written down on
page 30. Incorrect settings will prevent the decoder from
operating correctly.
An installation PIN code must first be entered before the Change
Dish Installation and its sub-menus can be accessed. This measure
helps to prevent accidental changes to the set up. The PIN code is
9949. This number cannot be changed.
LNB Configuration
Your decoder supports several LNB and network configuration
options. If your satellite dish installation does not include a Universal
(dual) LNB set up to the factory default settings, it is recommended
that you consult your installer as to your particular setup require-
ments.
Information on these options for the installer can be found on the
Manufacturer’s website:
http://www.uec.co.za