Specifications

DSD 700 OPERATING INSTRUCTIONS 25
TROUBLESHOOTING
If any problems are encountered when operating the decoder, make
use of the following guidelines to assist in solving the problem. The
decoder will automatically detect and diagnose many decoder and
transmission related problems. Where possible, the errors will be
communicated via messages on the TV screen and/or the decoder
display panel.
Locate either the corresponding error number and message or the
description of your problem in the troubleshooting table and follow
the advice provided.
If you have tried the appropriate remedy and still have difficulty in
operating your decoder, please call the appropriate hot line.
To upgrade the DSD software or check whether an upgrade is avail-
able, carry out the following:
1 Press the menu button on the RCU once. The Main Menu will
appear on the TV set.
2 Press to highlight Advanced Options.
3 Press OK.
The Advanced Options Menu is displayed.
4 Press to highlight DSD Upgrade.
5 Press OK.
The Upgrade screen is displayed with the message “Checking for
upgrade”. At this point, depending on whether an upgrade is available
or not, one of the following two messages appears on your TV screen:
Failure: no download found. or The upgrade will take
approximately X minutes. Press OK to continue or EXIT to cancel.
If no upgrade is available, the decoder will return to the service.
If an upgrade is available but you do not wish to upgrade, press EXIT
to return to the previous menu.
6 If you wish to upgrade press OK. A message is displayed:
The upgrade is active and will take approximately X
minutes
After the download is completed, the decoder will return to the
current service.
The process will take approximately 23 minutes. DO NOT
DISCONNECT THE DSD MAINS CONNECTION OR ANTENNA CABLE
DURING THIS PERIOD.
If, during an over-the air download, the decoder fails to accept the
download or freezes, a forced download can be performed as
follows
On the DSD front panel carry out the following procedure:
Press STANDBY, , , STANDBY in sequence. All button presses
should be done in quick succession.
A rotating bar on the DSD display indicates that a download is taking
place.