Specifications

10 OPERATING INSTRUCTIONS DSD 700
Decoder, VCR, TV, Hi-Fi
NOTE: It is recommended that you switch off the mains
supply to the decoder before connecting or
disconnecting the LNB connector.
1 Connect the terrestrial antenna connector to the RF IN socket
on the decoder.
Follow Steps 2 to 4 if you are not using SCART connectors
2 Using the supplied flylead, connect the RF OUT connector on
the decoder to the RF IN connector on the VCR.
3 Using the flylead supplied with the VCR, connect RF OUT on
the VCR to the RF IN on the TV
.
4 Connect the coaxial cable from the satellite dish to the LNB IN
connector on the decoder. Tighten the connector finger
tight.
Follow steps 5 and 6 if you are using SCART connections
5 Using a SCART-to-SCART cable (not supplied), connect the
TV SCART connector on the decoder to the SCART socket on
the TV.
6 Using another SCART cable, connect the VCR SCART on the
decoder to the SCART on the VCR.
7 Connect the VARIABLE LEFT and RIGHT HI-FI AUDIO OUT
connectors on the decoder to the LEFT and RIGHT AUDIO
INPUT connectors on the Hi-Fi.
8 Switch power on to the decoder.
9 Set the TV and VCR Scart Source and TV and VCR Scart
Video Output using the TV Installation menu. See page 23.
RF OUT
RF IN
MONO
AUDIO
VIDEO
OUT
STEREO AUDIO
OUTPUTS
R
L
DATA SERVICE
WARNING! High Voltage
DANGER! Do not open
Unauthorised opening
renders warranty invalid
Protect against moisture
LNB IN
LNB OUT
F
I
X
E
D
V
A
R
I
A
B
L
E
VCR
TV
S-Video
EXTERNAL MODEM
Republic of South Africa
400 mA max.
210 - 250V 50Hz 30W
SCART TO RCA
A
V
RF IN
REAR PANEL
L
R
RF IN
CONNECTIONS IN BOX USED IF NO SCART CONNECTORS
AUDIO
INPUT
VCR
Hi-Fi
TV SCART
VCR SCART
TV