Specifications

DSD 700 OPERATING INSTRUCTIONS 13
Bouquet Selection
The TV services are transmitted in packages called BOUQUETS,
each bouquet containing a series of services. The decoder has
provision for several bouquets, any of which can be selected by
pressing TV on the RCU, highlighting the required bouquet using the
up/down arrows on the RCU , then following the on-screen
instructions. Currently there is only one bouquet available called the
Public Bouquet, ther may be more bouquets available in the future
and to access them follow the above procedure.
When a bouquet is selected, the services in that bouquet will be
listed numerically in the Electronic Programme Guide (see page 15).
Selecting Specific Services
Specific TV or Audio Services can be selected, either:
• Directly
• By stepping through services
• By using the Open TV Electronic Programme Guide (EPG), or
• By using the Open TV Information Bar.
Selecting Services Directly
Services can only be selected directly using the RCU. To select a
specific service, do the following:
1 To select an audio service, press on the RCU. Press TV to
restore TV services.
2 Press the number of the required service on the RCU’s
numerical keypad.
The specific service will be heard/displayed after a few
moments accompanied by an information box at the bottom of
the TV screen with details of the selected service.
NOTE: To select services requiring two-digit numbers,
i.e.,10-99, press the first digit, then the second
digit without pausing.
TIP: When the key for the first digit is pressed on the RCU, the
corresponding number is displayed on the left of the front
panel numerical display on the decoder. After a few moments,
the number moves to the right. The second digit of two digit
numbers must be keyed in before this move takes place.
ª
«
Bouquet Selection
Press OK to select
Press EXIT to cancel
Public Bouquet
Stepping through Services
Stepping through services is possible using either the RCU or
decoder front panel keys.
Stepping using the RCU
To step through services using the RCU, do the following:
1 Select the type of service required, TV or audio ( )
2 Press P+ to step to the next service or P - to step to the
previous service in the list of available services.
After pressing P+ or P -, an information box is displayed at the
bottom of the TV screen with details of the service. After a
few seconds, the relevant service is displayed/heard.
3 If required, continue stepping by pressing P+ or P - until you
find the service you prefer. It is not necessary to wait for
services to be displayed/heard before stepping to the next or
previous service.
If you decide to watch or listen to a service you have stepped
to, wait for the service to be displayed/heard. The information
box will disappear after a short while or can be removed
immediately by pressing EXIT.
NOTE: When you reach the last available service in the
list and press P+ you are returned to the first
service in the list.
TIP: Use the convenient selecting and sorting facilities to
personalise the services list. After using these facilities, your
favourite services will be in your order of preference. Refer
to page 20.
Stepping using the Decoder Front Panel Keys
To step and select a specific service using the decoder front panel
keys, do the following:
1 Select the type of service required, by pressing TV/ to
switch between TV services and audio services. Selection of
the audio service is indicated by a green indicator on the front
panel display.
2 Press (up) to step to the next service or (down) to step
to the previous service in the list of available services.
After pressing or , an information box is displayed at the
bottom of the TV screen with details of the service. After a
few seconds the relevant service is displayed/heard.
3 Continue stepping, by pressing or until you find the
service you prefer. It is not necessary to wait for services to
be displayed/heard before stepping to the next or previous
service.
To view/listen to any service you have stepped to, wait for
the service to be displayed/heard. The information box will
disappear after a short while.
NOTE: When you reach the last service in the list,
pressing returns you to the first service in the
list. The and symbols have dual functions and
cannot be used for stepping while the volume
control box is displayed on the screen. This box
is displayed when setting the volume, see page
14.