Specifications

14 OPERATING INSTRUCTIONS DSD 700
Selecting Specific Services from the EPG
NOTE: For a description of the Electronic Programme
Guide (EPG) refer to page 15.
Selecting Services from the Information Bar
NOTE: A description of the Information Bar is on page
16.
Controlling the Show
Volume Control using the RCU Keys
NOTE: It is recommended that you first select a
terrestrial channel, then set the volume on the
TV to a comfortable listening level.
To change the volume level on the decoder, select your satellite
service, then press V+ to increase the volume level or V- to reduce
the volume level. The following is displayed on the TV screen when
adjusting volume:
The volume level is depicted by the length of the highlight bar.
NOTE: The Fixed Stereo Sound Outputs (Left and Right)
cannot be controlled with the volume control
keys on the RCU or on the front panel.
Volume Control using the Decoder Keys
To change the volume level, press P/V on the decoder. The volume
is again displayed for a brief time:
While the volume control window is displayed, press and release
or respectively to increase or reduce the volume level in
separate steps. The change in volume level is depicted by the
changing length of the highlight bar.
NOTE: The Variable Stereo Sound Outputs (Left and
Right) can be controlled using the volume control
keys on the RCU or on the front panel.
Mute
To mute the audio do the following:
1 Press on the RCU. The following window is displayed for
3 seconds and the audio muted:
2 To restore the audio press again. The audio is
restored at the previous level and the volume control
window displayed for 3 seconds.
3 Adjust the volume level using V+ and V-.
NOTE: The mute function is disabled when the FIXED
STEREO audio outputs (Left and Right) on the
decoder are used. This ensures a fixed volume
level for recording purposes. The VARIABLE
STEREO audio outputs (Left and Right) of the
decoder can, however, be muted.
Displaying Subtitles or Teletext
Subtitles
If subtitles are available, they are normally displayed on the screen
as part of the program.
To remove a subtitle do the following:
1 Press symbol on the RCU. A box is displayed on the TV
screen as follows:
NOTE: If subtitles are not available, a “No subtitling”
window is displayed for 5 seconds. Press EXIT if
required.
2 To restore the subtitles, press again. The following box
is displayed
Teletext
Some services (e.g., CNN) have a teletext service. This can be
selected as follows:
1 With the service selected, i.e., CNN, press symbol
twice on the RCU. The following box is displayed:
If teletext is not available, a “No teletext” window is displayed
for 5 seconds. If other languages are available keep pressing
the symbol until the language is selected.
2 To make the teletext transparent press the symbol
again.
3 To page up or down, press P+ or P- on the RCU. To change to
a distant page, select the page number on the RCU keypad,
then press OK
4 To clear the teletext , press EXIT on the RCU.
1 of 2 Stop subtitle
Press OK to select
2 of 2 (Language)
Press OK to select
1 of 1 English
Press OK to select