Specifications

DSD 700 OPERATING INSTRUCTIONS 15
Clock
To view the time do the following:
1 Press on the RCU. The date and time are displayed for
a few seconds. If required press EXIT to clear.
Selecting Soundtracks
Available soundtracks, included with programmes, can be heard
and selected at any time while watching a programme.
NOTE: Preferred soundtrack languages for automatic
selection can be set using the menu system.
Refer to Soundtrack Options (page 19).
To listen to and select available soundtracks, do the following:
1 Press ? on the RCU. The current soundtrack
language is displayed as follows:
Pressing OK selects the option listed.
2 Press the symbol again. If there are additional soundtracks
available, the next soundtrack option is listed in the window.
Continue pressing to cycle through all the available
soundtracks.
3 Press OK to select a soundtrack language. The soundtrack
window is displayed and the new soundtrack is heard.
Power Reset
If your TV picture freezes for a prolonged period, it is possible to
reset the decoder without unplugging it from the power supply.
Simultaneously press then release the and TV/ buttons on the
decoder front panel.
Signal Source Selection
Switching between signal source devices is automatic by using the
UHF button on the RCU. To select between the available signal
sources, a single press-release of the UHF button in normal running
mode (i.e., not in menu or EPG) switches to the next source. This is
an override selection in that it will switch to VCR even if a VCR is
not playing.
The signal source is indicated on the decoder front panel display.
The available options are:
! Decoder (IRD): This allows you to use your satellite services.
If yourTV and decoder are connected through SCART, this
will automatically switch your TV to AV and keep control of it.
If you do not wish this function to take place automatically, it
can be changed in the Installatrion menu. IRD is temporarily
displayed on the decoder front panel, defaulting to the
channel number.
! VCR: This allows you to view a program on the VCR. Press
Play on the VCR to view. If the VCR is in standby (off), and it
has a second SCART input, any source connected to the
SCART will be passed on to the decoder. VCR is temporarily
displayed on the decoder front panel.
! TV: If your decoder and TV are connected through
SCART, it will allow normal terrestrial channels to be viewed
on the TV. If the TV connector is not used, it will have
the same effect as the IRD setting.
Electronic Programme Guide
Using the EPG
1 On the RCU, press TV GUIDE. An on-screen menu is displayed
as follows:
NOTE: TV programmes are not displayed and audio not
heard while the EPG screen is displayed.
2 Use the cursor keys or to scroll up or down the list, as
only six events are shown on the screen. When the last event
is highlighted and you press , six new events are displayed
and the highlight is put at the top of the list. This also works for
scrolling up.
The list is continuous, so after the last service the Guide starts
displaying service 1 again.
The current programmes are listed when NOW is selected and
the programmes to follow are listed when NEXT is selected.
3 To move between the NOW or NEXT programmes, press 3 on
the RCU.
4 Select the highlighted programme to view/hear by pressing
OK. NEXT programmes cannot be viewed before their start
time.
Pressing OK with NEXT selected sets a program reminder and
a clock symbol appears in the information box at the bottom of
the screen, indicating a reminder. To remove the reminder
press OK again; the clock symbol disappears and a message
appears indicating that the reminder has been cancelled.
5 Additional information on the program is displayed when i on
the RCU is pressed with a service on the the EPG selected.
Press EXIT to return to the EPG.
6 Press 2 on the RCU to enter the Music & Radio guide. The
Music & Radio guide behaves exactly the same as the TV
guide. Pressing 1 on the RCU takes you back to the TV guide.
7 Press OK to return to normal viewing/listening.
8 In all programme guides, additional information on the
programs is displayed when i on the RCU is pressed while the
EPG is displayed and programme highlighted.
?
1 of 2 English
Press OK to select
1
1
/
0
3
/
9
9
1
4
:
1
2
:
5
6
1
2
3
4
5
6
O900
1000
0700
1100
0800
1800
0800
1000
0915
1000
0900
1000
2
Music
& Radio
3
Now
Next
Product Info
Disclosure
Super Sport
TV Guide
24 Hours
Press the info buttonfor more information.
Press OK to tune to this programme.
ABC
SBS
Imparja
No
Block