Specifications

DSD 700 OPERATING INSTRUCTIONS 15
Receiver
DUAL - FEED WITH TWO DiSEqC LNBs
COMMANDS REQUIRED:
i) Polarity (13
/
18
V
& DiSEqC)
ii) Band (0
/
22 kHz & DiSEqC)
iii) Position (DiSEqC)
iv) One repeat necessary
DiSEqC LNB
controlled by
Band & Polarity
commands
DiSEqC Loop - Through LNB controlled
by Band, Polarity and Position commands
2 1
LNB 1 SET-UP LNB 2 SET-UP
LNB Power: ON LNB Power: ON
LNB Mode: DiSEqC Single LNB Mode: DiSEqC Single
or Dual or Dual
LNB Frequency: LNB Frequency:
DiSEqC Command: EO1222 DiSEqC Command: EΟ1226
Tone Burst: None Tone Burst: None
See SpecificationsSee Specifications
Receiver
DUAL-FEED WITH LOOP - THROUGH LNB
A
ND ONE
STANDARD UNIVERSAL LNB
COMMANDS REQUIRED:
i) Polarity (13
/
18
V
& DiSEqC)
ii) Band (0
/
22kHz & DiSEqC)
iii) Position (DiSEqC)
13/18V
&
0/22 kHz
DiSEqC Loop - Through LNB controlled
by Band, Polarity and Position commands
LNB 1 SET-UP LNB 2 SET-UP
LNB Power: ON LNB Power: ON
LNB Mode: DiSEqC Single LNB Mode: Single or Dual
or Dual (non-DiSEqC)
LNB Frequency: LNB Frequency:
DiSEqC Command: EO1222 DiSEq Command: EO1226
Tone Burst: None Tone Burst: None
See SpecificationsSee Specifications