Specifications

DSD 700 OPERATING INSTRUCTIONS 17

Receiver

COMMUNAL RECEPTION WITH 8 IF INPUTS

USING 8 INPUT SWITCHES

COMMANDS REQUIRED:

i) Polarity (13/18V & DiSEqC)

ii) Band (0/22kHz & DiSEqC)

iii) Position (DiSEqC or Tone Burst)

Multi-switch controlled by

either DiSEqC commands or

conventional commands plus Tone Burst

Low

Band

Low

Band

High

Band

High

Band

LNB 1 SET-UP LNB 2 SET-UP

LNB Power: ON LNB Power: ON

LNB Mode: Single or Dual (Non DiSEqC) LNB Mode: Single or Dual (Non DiSEqC)

LNB Frequency: See Specifications LNB Frequency: See Specifications

DiSEqC Command: EO1022 DiSEq Command: EO1026

Tone Burst: None Tone Burst: None

2 1

Receiver

Dual-Feed with Mono-Block DiSEqC LNB

COMMANDS REQUIRED:

i) Polarity (DiSEqC)

ii) Band (DiSEqC)

iii) Position (DiSEqC)

DiSEqC Mono - Block LNB controlled

by Band, Polarity and Position commands

LNB SET-UP

LNB Power: ON

LNB Mode: DiSEqC Dual

LNB Frequency: See Specifications

DiSEqC Command: None

Tone Burst: None