Specifications

24 OPERATING INSTRUCTIONS DSD 700
USING MENUS
To use the Menu system:
1 Ensure that the decoder is not in standby mode by pressing
if necessary.
2 Press MENU on the RCU. The following Main Menu is
displayed, which provides access to all other menus a shown
in the following figure:
All the menus are navigated as follows:
1 Use or buttons to scroll the highlighted bar up or down
in a(sub)menu or a vertical list box.
2 Select a highlighted menu option and go one level lower within
the menu hierarchy by pressing OK on the RCU. This applies
to the Main Menu screen and all submenu screens.
In screens where parameters can be set, OK is used to save
the settings.
3 Use EXIT to return to the preceding menu (go one level higher
within the menu hierarchy).
In screens where the parameters can be set, EXIT is used to
cancel any settings that may have been entered without
saving.
4 Use and buttons to change the value of an input field
having preprogrammed values.
5 Use MENU to exit all menus and return to the TV or audio
programme.
6 Use numbered buttons to enter numerical values.
Language Selection
The Language Selection screen allows users to set the text
language of the decoder, if options are available. The text
language is set for the menus, EPG and Information Bar.
To select the text language of your choice, do the following:
1 Press MENU on the RCU.
The Main Menu screen is displayed with Language Selection
highlighted.
2 Press OK. The following option list is displayed:
Language Options in Guide and Menu
1 Press MENU on the RCU.
The Main Menu screen is displayed.
2 Press or to highlight Language Selection and then OK.
3 Press or to highlight Language Options in Guide and Menu.
4 Press OK.
The Language Menu containing a selection of languages is dis-
played, as follows:
5 Use or arrows to highlight preferred language.
6 Press OK to select the desired language.
7 Press EXIT to return to the Main Menu or MENU to return to the
service.
Soundtrack Options
Soundtrack Options allows users to set the programme language of
the decoder, where one is available.
1 Press MENU on the RCU.
The Main Menu screen is displayed.
2 Press or to highlight Language Selection.
3 Press OK. The language selection menu is displayed.
The Language Selection Menu is displayed.
4 Press or to highlight Soundtrack Options.
5 Press OK.
The current order soundtrack language preferences is displayed,
as follows:
Language Selection
Press and to select option
Press OK to confirm selection