Specifications

HD PVR Viewer’s Guide – UEC Page 11 of 62
S ET - UP 3 : HD PVR AND 1 S TANDARD D EFINITION TV
➊
Connect the four satellite feeds to the four LNB inputs (#2) on the HD PVR. If using a
SatCR LNB feed, connect to LNB input 2 (#3).
➋
Option A : AV Connectors
o Connect the Audio / Video cable to the video (#11) and audio (#12) outputs on the HD
PVR and then to the audio and video inputs on the TV.
➌
Option B : Analogue component video YPrPb
o Connect the component cables (red, green and blue) to the component outputs (#13)
on the HD PVR and then to the corresponding colours on the TV audio inputs.
➍
Option C : RF
o Connect the cable from the terrestrial antenna to the female F-type adaptor and
connect the female F-type adaptor to the aerial IN connector (#1 – marked with an
aerial) on the HD PVR.
o Connect a RF cable to the male F-type adaptor and connect the male F-type adaptor
to the aerial OUT connector (#1 – marked TV) on the HD PVR. Then connect the
other end of the RF cable to the aerial IN connector on the TV.
➎
Ensure that all connections are firm before you connect the power cable (#10) to the
power supply