INSTRUCTION MANUAL DLM2 1-800-547-5740 • Fax: (503) 643-6322 www.ueitest.com • email: info@ueitest.
Introduction Operating Instructions The DLM2 is designed to measure light levels in foot-candles or lux over 3 ranges. Measuring Procedure 1. Slide the “OFF/ON” switch to the “ON” position. Features include • 0 - 5000 foot-candles • Over 3 lux ranges • Accurate to ±5% with a 0.4 second sampling rate • Easy to read LCD display 2. Determine lux or foot candle (FC) on the “LUX/FC” switch. 3. Select the maximum range on the “RANGE” switch. 4.
Cleaning Periodically clean your meter’s case using a damp cloth. DO NOT use abrasive, flammable liquids, cleaning solvents, or strong detergents as they may damage the finish, impair safety, or affect the reliability of the structural components. Battery Replacement Always use a fresh replacement battery of the specified size and type. Immediately remove the old or weak battery from the meter and dispose of it in accordance with your local disposal regulations.
Adequate Light Levels For Your Working Or At Your Work Areas LUXES (1x) 10,000 5,000 Locations Factory 3,000 2,000 1,500 Electronic parts assembly line • Drafting Office • Typing • Drafting House Sewing Store Hospital School Restaurant Barber/ B e a u ty parlor DLM2-MAN For-front of show window Eye inspection 1,000 750 500 300 Typesetting at print shop Visual work at • Inspection work production line Clerical work • Reading • Study • Show window • Packing table Operating room Emergency
DLM2 Digital Light Meter Limited Warranty The DLM2 is warranted to be free from defects in materials and workmanship for a period of one year from the date of purchase. If within the warra n ty period your instrument should become inoperative from such defects, the unit will be repaired or replaced at UEi’s option. This warra n ty covers normal use and does not cover damage which occurs in shipment or failure which results from alteration, tampering, accident, misuse, abuse, neglect or improper maintenance.
