User Manual

53
Collision
Configurable
Configurable
Manual Mode
Configurable
Configurable
Reduced Mode
Configurable
Configurable
Offline Task Running
Configurable
Configurable
Robot Enabled
Configurable
Configurable
It is very important to install xArm according to the electrical
specifications.
All the I/O must comply with the specifications. The digital I/O can be
powered by a internal 24V power supply or by an external power supply
by configuring the power junction box. In the following figure, PWR is
the internal 24V power output. The lower terminal (24V-IN) is the 24V
input external power input for I/O. The default configuration is to use
internal power, see below.
If larger current is needed, connect the external power supply as shown
below.