User Manual

56
Emergency Stop
Protective Stop
Stops the motion of the robotic
Yes
Yes
Program execution
Stop
Suspend
The power supply of the robotic
Off
On
Reset
Manual
Auto or manual
Usage frequency
Not frequent
No more than once per run
Need re-initiation
Only releasing the brake
No
2.4.2.1. Default Safety Configuration
The robotic arm has been configured by default and can be operated
without any additional safety equipment, as the figure below. If there is
a problem with the robotic arm, please check the following figure for
the correct connection.
2.4.2.2. Connect to the Emergency Stop Button
In most applications, one or more additional emergency stop buttons
are required. The figure below shows how to connect one or more
emergency stop buttons.