User Manual

Step5:

Then check whether the computer IP is within 192.168.1.1-192.168.1.255

(the tail number should be 1 to 255, and can not be the same as the IP

address of the control box). If not, please modify the computer's IP.

Step6:

After the modification is completed, please verify the IP address of the

computer: enter cmd in the search box (see the figure below), open a

command prompt, and directly ping the IP address of the xArm in the

command line: ping 192.168.1.XXX (see the figure below ). You can

successfully send and receive data packets.