User Manual

23
1.
Each operator who uses the robotic arm system
should read the product user manual carefully.
Users should fully understand the standardized
operating procedures with the robotic arm, and
the solution to the robotic arm running error.
2.
When the device is running, even if the robotic
arm seems to stop, the robotic arm may be
waiting for the signal and in the upcoming action
status. Even in such a state, it should be
considered as the robotic arm is in action.
3.
A line should be drawn to mark the range of
motion of the robotic arm to let the operator
acknowledge the robotic arm, including its end
tools (such as gripper and suction cup, etc)
operating range.
4.
Check the robotic arm regularly to prevent
loosening of the bolts that may cause undesirable
consequences.
5.
Be careful when the robotic arm is running too
fast.
6.
Be careful about dropping items that can be
caused by accidental power off or unstable
clamping of the robotic arm.