User Manual
34
below).
1.2.2.4. Control Box Networking
Plug the Network Cable into the interface marked LAN on the Control
Box, and plug the other end of the Network Cable into the computer.
1.2.2.5. End-effector Installation
The End-effector flange has fourteen M6 threaded holes and one ะค5
positioning hole, where the end-effector of two different sizes can be
mounted. If the effector does not have a positioning hole, the
orientation of the end-effector must be documented in a file format, to
avoid errors and unexpected results when re-installing the end-effector.