User Manual

82
1.2.3 Connect to the Robotic Arm
There are the following two ways to communicate with the robotic arm.
1. If you access xArm Studio software, you can communicate with the
robotic arm through the following steps:
(1) Download xArm Studio
xArm Studio download address:
https://store-ufactory-cc.myshopify.com/pages/download-xarm
(2) Install xArm Studio software
(3) Open the xArm Studio software, and enter the IP address of the
control box in the search box (the default IP address of the device has
been marked on the side of the control box)
2. If you use a browser to access xArm Studio, you can communicate