User Manual

UFACTORY
6
1.3.1. Warning
Caution
Any use of the Gripper in noncompliance of these warnings is
inappropriate and may cause injury or damage.
Warning
● The Gripper needs to be properly secured before operating the robot.
● Do not install or operate a Gripper that is damaged or lacking parts.
● Never supply the Gripper with an alternative current (AC) source.
● Make sure all cord sets are always secured at both ends,Gripper end &
Robot end
● Always satisfy the recommended keying for electrical connections.
● Be sure no one is in the robot and/or gripper path before initializing
the robot's routine.
● Always satisfy the gripper payload.
● Set the gripper speed accordingly, based on your application.
● Keep fingers and clothes away from the gripper while the power is on.
● Do not use the gripper on people or animals.
1.3.2. Risk Assessment and Final Application
The xArm Gripper is meant to be used on an industrial robot. The robot,
gripper and any other equipment used in the final application must be