User's Manual

Confidential / All product specifications are subject to change without notice.
4
GEE810U-915U
FW Version – Display current FW version
HW Revision – Display current HW reversion (should not change)
Wan Status – Display current backhaul connection state in the following format:
<WAN Type>,<Current IP address> or NO (if WAN connection is not
ready)
Forwarding – “bs_pkt_fwd” process is running.
“bs_pkt_fwd” forwards RF packets receive by the concentrator to a
server through a IP/UDP link, and emits RF packets that are sent by
the server.
The default value: pkt_fwd_start=false (Disable).
This Status is used for “U-Thing” server.
• Ping GW – Display the ping test result to default gateway
PASS (default GW is okay)
FAIL (default GW is unreachable or ICMP-blocked)
• Ping DNS Server – Display the result to ping “8.8.8.8” or “168.95.1.1”
PASS (ping test to ping “8.8.8.8” or “168.95.1.1” is okay)
FAIL (ping test to ping “8.8.8.8” or “168.95.1.1” is failed)
4.2 Set WAN Interface
Select [WAN] page for setting WAN configuration
The LoRa service on Indoor GW will start automatically when backhaul connection is ready.
Hence, user needs to take the backhaul (WAN) connection per network environment that Indoor
GW is installed.