User's Manual

Confidential / All product specifications are subject to change without notice.
6
GEE810U-915U
4.4 Management Page

Firmware Upgrade
Before performing FW upgrade, please check the Status page for current firmware version.
You need to be aware that only firmware for the same production could be used. Using invalid
firmware or firmware from other products will get a “FW Upgrade Fail” message.
The firmware file usually has a name in following format:
PCG020C_[Date Code]_TI1003TP
Where [Date Code] is the release date of this firmware. You may refer the release note for
version information.
For firmware upgrade, first use [Choose File] button to select firmware file, then press
[Upgrade] to start the upgrade process. After a success upgrade, the device will reboot
automatically.
Factory Reset
If the device is not function as expected, or the release note of new firmware request to do
factory reset due to configuration adjustment, you may use [Reset] to reset all configurations
to default value of firmware. After completion of reset operation, a message “Factory reset is
done!! Waiting for rebooting..” will be shown and the device reboots automatically.
4.5 LRR Log Page
With integrated ThingPark Wireless client application - LRR, both LoRa traffic and control can
be observed via the application log. This page provides an easy way to do filtering, selection
and saving on the log. On page loading, the current date information of device is shown before
the radio selection, and week day of today is selected as default. Since LRR log on device is
preserved as the last 7 week days, please do selection before further operation if you want to
view log of the other past day.