FAQ

CHARRED WOOD FAQS
What is the actual width that will be visible?
Charred Wood - The width of the 1x6 shiplap board is 5.375 in. with a thickness of .625 in. and
an exposed face of 4.625 in. The width of the trim board is 3.5 in. with a thickness of .75 in.
Can I use Charred Wood shiplap on my bathroom walls?
Yes, these boards can be used on walls within a bathroom. We recommend you seal the
boards with a wood protector sealant to protect them from moisture.
What is the paint color match?
Charred Wood products go through a proprietary color formulation process; therefore an
exact paint match is difficult. Consult with a paint professional at your local retailer to specify
a custom color that suites your needs.
Do these have rabbet joints (or any joints) cut into them?
When installed horizontally Charred Wood shiplap features a rabbited joint on both top and
bottom edges of the board allowing piece to snugly fit together. The board ends do not have
a pattern and butt directly together without overlap.
Is the texture the same on both sides of the shiplap?
Charred Wood shiplap boards are charred on the face and the sides. The boards are not
charred on the reverse side/face.