BT-Link Aviation Headset Bluetooth Adapter Turn ANY non-Bluetooth aviation headset into a bluetooth headset ------------------------------------------------------------------- 1 ------------------------------------------------------------------
Advisories. Please read the information in this user manual carefully and completely before using your BT-Link. Keep these instructions and make them easily accessible to all other users. Always include this user manual when giving this BT-Link to third parties. When listening to an audio source via your BT-Link, please limit the volume to safe levels to ensure you are able to hear communication and warning alarms from your aircraft.
5. Three types Audio Priority Modes AUTO: With incoming transmission, Bluetooth and Aux are muted, and resumes after the transmission ends. MIX: Aux and Bluetooth continue to play with the transmission. OFF: Only transmissions are heard, Bluetooth and Aux are muted 6. USB type C external power source input, to by pass batteries for power USB POWER Rated INPUT: 5.0V 500mA Very important: If more than 5V or 500mA then will broke the BT-Link or cause some noise for the device 7.
connected(Not suitable for all cellphones) 16. Two AA batteries provides 20-25 hours of continuous usage 17. Bluetooth volume control has previous/next songs function, When connected with the AUX line, this control can also control the volume of the AUX in audio Understanding Controls of BT-Link.
A. Volume Control: You can independently adjust the volume from your BT-Link for each ear. B. Power Status/Button: Press and hold for one second to turn ON or OFF BT-Link. LED indicates the power source and its status. C. Bluetooth Status/Button: Press and hold for one second to turn ON or OFF the Bluetooth. LED indicates the Bluetooth status. Additional phone functions are available. D. Aux Input: Use the provided 3.5 mm cable to connect to your audio source without Bluetooth. when put the 3.
Getting started. Install batteries Press here and hold then slip to the right or left to open or close the battery box Powering On. To switch On: Press the power button for more than 1 second and then let go. Then there is a voice “Power ON” If power button is pressed for more than 3 seconds, BT-Link will turn on and then off.
Bluetooth. To switch on Bluetooth: Press the Bluetooth button for more than 1 second to turn on Bluetooth, BT-Link will begin searching for it. To switch off Bluetooth: Press the Bluetooth button for more than 1 second. On your device,look for the Bluetooth name“BT-Link”If prompted for a code, enter 0000. Tips: BT-Link with bluetooth 5.
Bluetooth Volume or next / previous songs Control On the side of the BT-Link Long press + / and - / to adjust the Bluetooth volume When to the Max or Min volume there is DiDi sound Short press + / and - / to switch to next / previous songs. USB POWER Rated INPUT: 5.0V 500mA Bluetooth Phone Functions.
Headset Volume. To adjust the headset volume, please use the volume knobs on the front of your BT-Link. Audio Priority Modes. You may wish to mute your auxiliary audios when you are sending or receiving transmission. AUTO: With incoming transmission,Bluetooth and Aux are muted and resume after transmission ends; MIX: Aux and Bluetooth continue to play with the transmission; Mute: Only transmission are heard,Bluetooth and Aux are muted. Aux In.
Use the provided 3.5 mm cable to connect your device to the AUX socket. Adjust the volume of your Aux input from your device an be connected to an external audio source such as a portable audio device or a GPS. Usually you just need one cable with 3 poles male 3.5mm connectors is OK. Tip: Be sure to have the auxiliary audio at a volume that ensures you do not miss any important communications or aircraft sounds. LED Color Indicators.
Steady Blue - Aux 3.5mm plug in as line in Mode Mono / Stereo Switch The switch is located on the LEFT side of the back of your BT-Link For most general aviation aircraft, the Mono setting is correct. If you only hear in one side of your headset, please switch to the Stereo mode. Auto Shut Off. You have the option to disable the auto shut off feature. The switch is located on the RIGHT side of the back of your BT-Link.
