User's Manual

ManualsBrandsuG ManualsElectronicsuGW800 Pro

Table Of Contents

uGW800 USER MANUAL

1. Introduction

uGW800 is an IoT hotspot, designed by Amber-Link, supporting LoRaWAN, LongFi and Helium block-chain

protocol, compatible with all standard LoRaWAN devices. Its runtime power consumption < 5W, but the

signal coverage is more than 10 miles. One hotpsot can connect with thousands IoT devices and support

real-time data transactions.

2. Network

Summary of content (7 pages)

PAGE 1
uGW800 USER MANUAL 1. Introduction uGW800 is an IoT hotspot, designed by Amber-Link, supporting LoRaWAN, LongFi and Helium block-chain protocol, compatible with all standard LoRaWAN devices. Its runtime power consumption < 5W, but the signal coverage is more than 10 miles. One hotpsot can connect with thousands IoT devices and support real-time data transactions. 2.
PAGE 2
. Network uGW800 integrates the Helium Miner firmware and LoRaWAN packet forward module. The hotspot sends the received packet to cloud or block-chain by either Ethernet or Wi-Fi network. 3. Specifications Item Description CPU Quad core Cortex-A35 64-bits CPU@1.5GHz RAM 2GB DDR3 FLASH 64GB eMMC Wi-Fi IEEE 802.11b/g/n 2.
PAGE 3
5. Interface 6.
PAGE 4
Color Indicator status Red Hotspot power-on and doing initialization Yellow Hotspot is running at data synchonizing Green Hotspot is ready for radio receive and uplink Blue Hotspot is in configurate mode --- Turned off 7. Package Content 8. User guide Download the mobile App iPhone users search "uGWAN Hotspot" APP in Apple store and follow the guide for APP installation. Android users download and install the APPs by either uGWAN.io website or from Google Play store.
PAGE 5
Insert the RP-SMA connector of the antenna feeder Connect ethenet cable if needed Connect to 12V-DC power adapter (in packet) or power the device by USB Type-C adapter (not in the packet). Configure network and connect App with hotspot Open the uGWAN Hotspot App in your phone, register to enter, and select "Add Hotspot". Select uGW800-serier hotspot, you can read the network configuration instructions first, or select "Skip" to operate step by step according to the prompts on the page.
PAGE 6
Indoor: Place the hotspot on desk Connect antenna or antenna extension cable to the hotspot, place the antenna close to window as near as possible. Ethernet cable is needed. Connect 12V-DC power supply or USB Type-C cable Wall-mounted (outdoor): Check with uGWAN sales to get the wall-mount kit (not in the packet) Follow the guide to fix both hotpsot and FRP antenna solidly.
PAGE 7
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body. -- Amber-Link Network Technology Co., Ltd.