Use and Care Guide

G. Lightweight aggregate non-skid texture additive for oil base, latex base, epoxy floor paints and
clear coatings.
1. Acceptable Product:
a. DRYLOK
®
Non-Skid Texture Additive.
H. Siliconized acrylic gun-grade latex filler for sealing cracks and mortar joint in masonry walls,
sidewalks, steps or floors.
1. Acceptable Product:
a. DRYLOK
®
Masonry Crack Filler.
I. Siliconized acrylic pourable latex filler for sealing cracks and mortar joints in masonry walls,
sidewalks, steps or floors.
1. Acceptable Product:
a. DRYLOK
®
Pourable Masonry Crack Filler.
2.3 MIXING
A. Refer to manufacturer’s written instructions on the container or available on the manufacturer’s
website
B. Color:
1. Refer to individual container.
PART 3 - EXECUTION
3.1 EXAMINATION
A. Comply with Section 01 70 00.
3.2 SURFACE PREPARATION
A. Refer to manufacturer’s written instructions on the container or available on the manufacturer’s
website.
3.3 APPLICATION - GENERAL
A. Refer to manufacturer’s written instructions on the container or available on the manufacturer’s
website.
3.4 CLEANING
A. Clean material from tools and equipment as instructed in the written instructions on the
container or available on the manufacturer’s website.
3.5 PROTECTION
A. Protect work from damage of other trades during construction. Correct deficiencies or damage
by cleaning, repairing, reapplying or recoating, as approved by Architect.
END OF SECTION