User's Manual

Installing the Base Station

1. Choose the location of the UgMO Base Station following these guide lines:

• Base Station needs to be 12-18 inches away from and higher than the

irrigation clock.

• Base Station should be within 600 feet of any possible sensor location.

• Base Station should not be mounted near or on the same plane as

large metal objects or high voltage transformers.

• When installing two Base Stations, place them at least 10 inches apart.

2. After locating the optimum location for the UgMO Base Station, use the

Base Station Bracket mounting plate as a template to mark the drilling

locations.

3. Drill two holes (small pilot holes if mounting to a solid material like wood

or larger holes to accommodate a drywall, stucco or concrete alligator

anchor). Tapcon screws are also an option.

4. Secure the mounting plate to the wall.

5. Insert the Bracket Arm into the Bracket Adaptor on the rear of the Base

Station. Tighten with provided Allen wrench.

6. Using the provided Allen wrench attach the Bracket Arm to the mounting

plate.

7. Rotate bracket arm so that the hinge allows for side-to-side movement- not

up and down.

MOUNTING THE BASE STATION