User's Manual

Auto/Bypass Indicator

Indicates that UgMO is controlling the watering

Indicates that the UgMO system is being bypassed and the clock controls the watering. This is useful for when you

want to turn on a zone manually for maintenance or to water in new plantings..

Pump/Master Valve Indicator

If the irrigation system has a Pump or Master Valve, this symbol will ﬂash to indicate that the Pump or Master Valve

is operating when a zone is turned on.

This area ﬂashes “ON” whenever UgMO allows a zone to come on regardless of the presence of a Pump or Master

Valve.

Water Savings Indicator

Displays a calculation of the average time UgMO did not allow the irrigation clock to water. In this example, UgMO

reduced the total watering time by 33% since the system was last restarted.

Zone Control Indicator

There are six columns representing each zone controlled by UgMO (1-6)

Indicates the zone is controlled by one sensor

Indicates the zone is controlled by more than one sensor

Indicates the zone is being controlled by the “Common Sensor”