User's Manual

17
Battery and Wireless Strength Indicator
The bottom row of each column displays the wireless connection and battery strength of each sensor.
This indicates that the zone has not been paired to a sensor. All columns will display these “dashes” when the Base Sta-
tion is first powered on and no sensors have been paired.
The black box indicates that the sensor battery has sufficient charge.
The full antenna symbol indicates the Base Station is receiving regular signals from the sensor.
The empty box indicates a low battery warning.
The empty antenna symbol indicates several missed signals from the sensor.
These indicate no wireless connection to the sensor. This will appear briefly after a sensor has been paired to a zone
until a signal is received. If radio signals have been lost for 4 days or upon reset of the Base Station (hold down [Select]
for 3-4 seconds, then release), these symbols will appear.
Rotating the selection wheel while in the main screen WHILE pressing [Select] will bring up
the [Set Contrast] screen. Rotating the wheel will allow adjustment of the screen contrast.
This can be helpful in very brightly lit installation locations.
Press [Select] and this adjustment will be saved.
NOTE: Rotating the wheel while in the main screen will always activate the menu screens
discussed below.
F
SET CONTRAST