User's Manual

18
Base Station User Interface
Pairing sensors to Base Station: Choosing Sensors
1. Read the Network Address (NWA) on the Tine Sleeve or bottom of the wireless sensor.
This will be the 8 digit numbers and/or letters following “NWA” on the label. (Example:
NWA:100002B3).
2. Rotate the [Selection Wheel] down to the [Manage Sensors] page.
3. When there are no sensors paired, the screen will look like the figure to the left.
4. Press [Select] . The [A] will be highlighted and “Add” will appear.
5. Press [Select]. The following screen will appear.
6. This screen allows you to choose your method of entry. The [Choose Sensor] option will display
all of the NWAs that are within range of the base station and allows you to choose the one you
want. This is the recommended method. [Manual Entry] allows a network address (NWA) to be
entered one character at a time.
MANAGE SENSORS
Wireless Sensors need to be linked (paired) to a Base Station and then assigned to one or more irrigation zones. This is an easy process.