User's Manual

25
MANAGE ZONE SETTINGS
There are times when you may need to bypass UgMO for a specific zone but not all of the
zones (e.g. establishing new plantings). At other times, you may wish to restrict a zone from
watering (e.g. a broken head in a particular zone). These settings are on the [Manage Zone
Settings] page.
1. Rotate the [Selection Wheel] until [Manage Zone Settings] is displayed.
2. Press [Select].
3. The bubble next to “Sensor” is filled to indicate the zone is managed by the sensor(s).
4. Rotate to “Bypass” and press [Select].
5. Selecting “Always OFF” will set the system so even if the irrigation clock requests water,
the zone will not turn on.
6. Scroll to [X] to exit this screen.
7. Press [Select] and scroll to [Exit Menu] and press [Select] to return to the main screen.
Zone Bypass Settings