User's Manual

26
Base Station User Interface
It is possible to assign more than one sensor to a zone. (See Manage Sensors). UgMO allows
you to determine how the sensor data is used by the system to manage the watering. The
system default setting is set to average the data coming from all the sensors in the zone. Other
options include using the Driest sensor reading or the Wettest sensor reading.
1. Rotate the [Selection Wheel] until [Manage Zone Settings] is displayed.
2. Press [Select].
3. The bubble next to “Average” is filled to indicate the zone will average the wetness data of
all sensors assigned to the zone.
4. Scroll to highlight either “Wettest” or “Driest” to change this selection.
5. Press [Select] to enter this setting.
6. Scroll to [X] to exit this screen.
7. Press [Select] and scroll to [Exit Menu] and press [Select] to return to the main screen.
MANAGE ZONE SETTINGS CONTINUED
Multiple Sensors per Zone Settings