User manual

Intellibox Basic
43
7.5 Selecting Inputs to be Monitored
When switching on the Intellibox, the first block with inputs 1-16 is
always shown. To show other inputs, the display can be changed in
blocks of 16 inputs. This corresponds to the module addresses of
feedback modules with 16 inputs.
Pressing the [menu] key the display changes to:
Using the numeric keyboard another module address can then be
entered. The valid addresses are 1 to 128.
In the appendix you will find a table from which you can determine
which feedback address comes from which module.
Press the [menu] key to return to normal running.