User manual

Intellibox Basic
5
1. The Digital Center Intellibox Basic
The Intellibox can be used with layouts using the Motorola and DCC
digital formats simultaneously, on the same track, and is therefore a
genuine multi-protocol Digital system. It is extremely efficient and
compact and brings many functions into a single box.
1.1 Description
The entire system in one box
The Intellibox has on board all the functions which formerly had to
be laboriously installed into the layout.
With Speed controller
Using two rotating controls, two locomotives can be independently
controlled.
With Booster
A high performance booster which is short circuit proof, has an
output current of 3 A. Its operating voltage can be limited to 18V for
N-gauge.
With Keyboard
A keyboard that can switch 320 (Märklin) and/or 2000 (DCC)
solenoids, with direct access to 8 items in each case. At the same
time feedback on the status of the turnout or signal is indicated in
the display.
With Programmer
Simple menu-driven programming of Uhlenbrock, Motorola, DCC
compatible decoders.
With USB Interface
Computer interface connector allows computer control of model
railway layouts.
With Updatable system software
The Intellibox system software can be updated at any time using the
internal interface.
Various data formats
The Intellibox can control locomotive, function and switch decoders
of most manufacturers mixed on a layout.
The following data formats can be transmitted:
Motorola data format
Uhlenbrock, Märklin direct current, Viessmann
Extended Motorola data format (Gauge I)
Uhlenbrock, Märklin alternating current Gauge I format
DCC data format
Uhlenbrock, Märklin direct current, Arnold, Digitrax, Lenz, LGB,
Roco and all DCC compatible decoders.