User manual

Intellibox Basic
50
If the LISSY receiver reports a locomotive and indicated this in the
middle part of the display, then control of this locomotive can be
taken over on one of the two controllers of the Intellibox. For this
you press L-key in order to take over the locomotive on the left
controller and R-key in order to take over the locomotive on the
right controller.
9.4 Calling up a LISSY Receiver
In the LISSY mode of the Intellibox all of the 4096 possible LISSY
receivers can be monitored. The address of the LISSY receivers to
be supervised can be changed with m-key.
Method:
• Press M-key repeatedly until the display reaches "LISSY
mode"
• Press m key
• Using the numeric keyboard another address can be registered.
Addresses 1-4096 are valid.
• With m key return to normal driving.
9.5 DirectDrive
Take control of the locomotive, which last passed over a certain
LISSY receiver, by the push of a button on the controller without
having to enter its address.