User manual

Intellibox Basic
68
Problem Cause Solution
Individual locomotives do not
run.
The locomotive decoders are
not addressed with the correct
data format.
Since decoders cannot give
feedback to the Intellibox, the
Intellibox cannot determine
by simply selecting the
locomotive address, which
data format is required to
control the decoder.
Check the data format
needed for each of the
locomotive decoders and set
it to the correct data format
(chapter 5.3.3).
A solenoid decoder does not
function.
The solenoid decoders use a
different data format from that
selected for output by the
Intellibox as the general data
format for solenoid decoders.
Check the data format of the
“not working” solenoid
decoders and adjust it in the
“Basic settings” menu –
accessory setting – set the
correct data format for each
decoder used.
HOTLINE
When you are at a loss on how to continue
We are here for you.
Mondays to Fridays 14:00-16:00
Wednesdays 16:00-18:00
02045-858327
Before you call us,
Make sure you have the following at hand:
Serial number of your Intellibox,
version number of the system software of your Intellibox
and this manual
.
You can obtain our catalog from your specialist dealer
or from us for 3.50 euro plus postage of 5.00 euro in stamps.
All our products have a warranty of two years.
We reserve the right to change data in this booklet at anytime.