User manual

Intellibox Basic

Non-Volatile memory

All settings, which have been done with the Intellibox, remain non-

volatile, even if the equipment is switched off for months.

Updatable system software

Using the Intellibox’s internal interface the system software can be

updated at any time.

Compatible with many other devices

On the back of the Intellibox Basic are sockets for transformer,

track, programming track, DCC booster, Roco and LGB Lokmaus1,

s88 feedback modules, Digitrax LocoNet and the USB computer

interface.

Operation as Auxiliary Device

The Intellibox basic can be attached at another LocoNet center

(Intellibox IR, Intellibox basic or twin center) as an auxiliary device

and then taking on the functions of a control panel, a 3A booster

and a LocoNet power feed. In addition, a further USB port is

available.

1.2 Configuration of the Intellibox at Power-on

The Intellibox can load various configuration options at power on, if

a key in the middle block of keys is held pressed.

The individual keys have different functions.

Procedure

Disconnect the Intellibox from the transformer (pull the 6 pins plug

from socket 1). Press appropriate key as you return the plug to

socket 1. Hold the key until the display comes on.

Testing Control Elements

If the M key is held the Intellibox starts in a test mode for keys,

speed knob and display.

Language selection

If one of the numeric keys is held when starting, the Intellibox starts

with the appropriate language.

[1] German [4] Italian [7] Spanish

[2] English [5] Dutch [8] Portuguese

[3] French [6] Swedish [9] Danish

Configuration of display

If the C-key is held down at start-up the Intellibox will bring up a

menu for setting the contrast of the LCD display.

Holding the +-key at start-up forces the Intellibox to reset contrast

and brightness of the display to factory default.